LCD1602 16x2 LCD Display Module for Arduino & Raspberry Pi
SKU 72-CXUX-RDLJ
$7.99 USD
Shipping
& tax calculated at checkout
In stock· Order by 3pm ET and it ships today
16x2 character LCD for Arduino and Raspberry Pi projects, ideal for sensor readouts, menus, and status screens.
- Free Ground Shipping U.S. orders $35+
- Ships from USA Domestic fulfillment
- 30-day returns Free defect replacement
- 7-day support Fast email replies
Frequently bought together
LCD1602 16x2 LCD Display Module for Arduino & Raspberry Pi
★★★★★
(2)
$7.99
This item
BME280 Pre-Soldered Temperature, Pressure & Humidity Sensor for Arduino & Raspberry Pi
★★★★★
(55)
$9.98
Total for 4 items
$29.95
Products related to this item
No reviews yetSSD1306 0.96" Blue I2C OLED Display Module 4-Pin for Arduino, Raspberry Pi & ESP32
$6.89
No reviews yetSSD1306 0.96" I2C White OLED Display Module 4-Pin for Arduino, Raspberry Pi & ESP32
$6.89
No reviews yet1.3" I2C Blue OLED Display Module 4-Pin SH1106
$8.99
No reviews yet1.3" I2C White OLED Display Module 4-Pin SH1106
$8.99
★★★★★
(2)
1.8" TFT LCD Display 128x160 Pre-Soldered Both Sides for Arduino & ESP32
$14.99
★★★★★
(1)
ILI9341 2.8" SPI TFT LCD Touch Screen Module 240x320 for Arduino, ESP32 & STM32
$10.99
Overview
Product Overview
The ShillehTek LCD1602 16x2 Display Module is a classic character LCD that shows 16 characters per line across 2 lines, making it perfect for simple project UIs like sensor readouts, menus, counters, and status messages. It is widely supported with Arduino and Raspberry Pi libraries and is a go-to display for beginners because it is reliable, readable, and easy to integrate into almost any DIY build. Use it for temperature and humidity dashboards, timers, voltage monitors, robot status screens, and quick debugging output without needing a full graphics display.
Questions & answers
Frequently asked questions
Yes. This 16x2 character LCD is widely supported by Arduino and Raspberry Pi libraries, making it suitable for basic project interfaces, sensor readouts, status messages, and beginner DIY builds using either platform.
ShillehTek IoT modules are sold with headers pre-soldered, so the display is intended to be ready for jumper-wire connections instead of requiring header soldering. You still need to wire the correct pins and load compatible LCD code.
This module uses a parallel character LCD interface, not I2C by default. It connects through multiple control and data lines, so your code and wiring must match the LCD library pin assignments used in your project.
A 16x2 LCD is useful for simple text-based project interfaces, including temperature and humidity dashboards, timers, counters, voltage monitors, robot status screens, menus, and quick debugging output when a full graphics display is unnecessary.
If the display powers on but text is missing or hard to read, check the contrast setting, backlight wiring, ground connection, and library pin mapping. Most LCD1602 issues come from wiring mismatches or contrast being set incorrectly.
Have other questions?
Chat with our US-based team — we usually reply fast.
What's included
Features & Specs
Reference
Documents
Full Product Manual ShillehTek LCD1602 16x2 LCD Display Module for Arduino Raspberry Pi DIY | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.Learn
Related Tutorials
ESP32 + LCD1602: Blink Hello World with Logic Level Shifter
Build an ESP32-controlled LCD1602 16x2 display with a logic level shifter to blink "Hello, World!" reliably using 5V ...
Arduino 433MHz RF Modules: Send Text to LCD
Build an Arduino 433MHz RF transmitter and receiver link to send Serial Monitor text wirelessly and display it on a 1...
Raspberry Pi Pico W BLE: Temp in MicroPython
Build Raspberry Pi Pico W BLE peripheral and central in MicroPython to stream and read on-board temperature using aio...
Arduino MCP2515 CAN Bus Module: DHT11 Data to LCD
Build an Arduino MCP2515 CAN bus link that sends DHT11 temperature and humidity from a Nano to a Uno and displays it ...
Arduino 4x4 Membrane Keypad: Read Keys in Serial
Wire a 4x4 membrane keypad to an Arduino and read key presses in the Serial Monitor, plus a simple passcode check usi...
Arduino Nano DHT22: Log Temp and Humidity to Serial
Build an Arduino Nano DHT22 temperature and humidity logger that prints stable readings to Serial every 2 seconds usi...
Arduino TM1637, SSD1306, E-Paper: Pick a Display
Compare TM1637, SSD1306 OLED, and 2.13-inch e-paper to pick the right Arduino display based on power, refresh rate, r...
Arduino Nano APDS-9960: Gesture LCD Menu Control
Build an Arduino Nano APDS-9960 gesture-controlled 16x2 I2C LCD menu to navigate options and toggle loads with simple...
Arduino UNO HMC5883L: Show X/Y/Z on 16x2 LCD
Build an Arduino UNO HMC5883L compass readout that streams live X/Y/Z magnetic field values to Serial and a 16x2 LCD ...
Arduino 10K NTC Thermistor: LCD Thermometer Alarm
Build an Arduino 10K NTC thermistor LCD thermometer with C/ F display and a 100 F alarm using Steinhart-Hart for stab...
Arduino PN532 NFC/RFID: Read, Write, Build Wallet
Build an Arduino PN532 NFC/RFID reader-writer with a 1602 LCD, then store packed-BCD credits on a MIFARE tag for an e...
Watch
Related Videos
Verified buyers
Customer Reviews
LCD1602 16x2 LCD Display Module for Arduino & Raspberry Pi
