1.3 inch blue OLED display module with 4-pin connector ShillehTek

1.3" I2C Blue OLED Display Module 4-Pin SH1106

SKU AA142

$8.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

1.3-inch 128x64 blue OLED display module with SH1106 driver for sensor data, menus, clocks, and status screens via 4-pin I2C on Arduino, Raspberry Pi, ESP32, robotics, home automation, prototyping.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
1.3 inch blue OLED display module with 4-pin connector ShillehTek 1.3" I2C Blue OLED Display Module 4-Pin SH1106No reviews yet $8.99 This item
Top front view of Raspberry Pi Pico 2 with pre-soldered headers by ShillehTek Raspberry Pi Pico 2 with Pre-Soldered Headers ★★★★★ (1) $11.99
Close-up of ShillehTek Pre-Soldered BME280 sensor with purple PCB and metal pins BME280 Pre-Soldered Temperature, Pressure & Humidity Sensor for Arduino & Raspberry Pi ★★★★★ (54) $9.98
DS3231 AT24C32 precision RTC I2C module with CR2032 battery for accurate timekeeping DS3231 AT24C32 Precision RTC I2C Module with CR2032 BatteryNo reviews yet $5.99
Total for 4 items
$36.95

Products related to this item

angled close-up of blue I2C OLED display module SSD1306 0.96 inch for Arduino ESP32
No reviews yetSSD1306 0.96" Blue I2C OLED Display Module 4-Pin for Arduino, Raspberry Pi & ESP32 $6.89
ShillehTek SSD1306 0.96 inch I2C White OLED Display Module angled view
No reviews yetSSD1306 0.96" I2C White OLED Display Module 4-Pin for Arduino, Raspberry Pi & ESP32 $6.89
angled view of 1.3 inch I2C white OLED display module with 4-pin SH1106
No reviews yet1.3" I2C White OLED Display Module 4-Pin SH1106 $8.99
ShillehTek 1.8 inch TFT LCD display angled view with pins and red PCB
No reviews yet1.8" TFT LCD Display 128x160 Pre-Soldered Both Sides for Arduino & ESP32 $14.99
ShillehTek 2.8 inch SPI TFT LCD touch screen module with stylus pen
No reviews yetILI9341 2.8" SPI TFT LCD Touch Screen Module 240x320 for Arduino, ESP32 & STM32 $10.99
ShillehTek LCD1602 16x2 LCD display module with blue screen close-up
★★★★★ (2) LCD1602 16x2 LCD Display Module for Arduino & Raspberry Pi $7.99

Overview

Product Overview

This 1.3-inch I2C blue OLED display module is a compact graphic screen for showing sensor data, menus, status readouts, clocks, and simple UI elements in electronics projects. Built around the SH1106 driver, it provides a 128x64 pixel monochrome blue display over a simple 4-pin I2C interface with VCC, GND, SDA, and SCL, making wiring straightforward on Arduino, Raspberry Pi, ESP32, and other microcontroller or SBC platforms with I2C support. The larger 1.3-inch format offers better readability than smaller 0.96-inch OLEDs, making it a strong choice for prototyping, robotics, home automation dashboards, and handheld DIY devices.

Questions & answers

Frequently asked questions

Yes. It is designed for Arduino, ESP32, Raspberry Pi, and other microcontroller or SBC platforms with I2C support. Use an SH1106-compatible display library or driver in your code for the 128x64 OLED panel.
Yes. This ShillehTek module is intended for straightforward prototyping with its 4-pin VCC, GND, SDA, and SCL interface, so you can connect jumper wires directly without soldering a header first.
It uses a 4-pin I2C connection: VCC and GND for power, plus SDA and SCL for data and clock. The display is a 128x64 monochrome blue OLED driven by SH1106.
The 1.3-inch 128x64 screen works well for sensor readouts, menus, clocks, device status, robotics displays, home automation dashboards, and handheld DIY interfaces where a compact blue monochrome graphic display is enough.
Confirm VCC, GND, SDA, and SCL are on the correct pins, I2C is enabled on the host, and your code uses an SH1106-compatible driver rather than an SSD1306-only configuration. An I2C scanner can help verify detection.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

Display Size 1.3-inch OLED screen offers better readability for menus, sensor data, and status readouts.

Driver Chip SH1106 controller drives a 128x64 pixel monochrome graphic display for text and simple UI elements.

I2C Interface 4-pin I2C connection uses VCC, GND, SDA, and SCL for straightforward wiring.

Display Color Blue monochrome OLED panel provides clear graphic output in a compact module.

Platform Support Compatible with Arduino, Raspberry Pi, ESP32, and other microcontrollers or SBCs with I2C support.

Common Uses Well suited for prototyping, robotics, home automation dashboards, clocks, and handheld DIY devices.

Reference

Documents

Full Product Manual 1.3" I2C Blue OLED Display Module 4-Pin SH1106 | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Datasheet

Watch

Related Videos

Verified buyers

Customer Reviews