GT-U7 NEO-6M GPS Module with square antenna and micro USB port ShillehTek

GT-U7 NEO-6M GPS Module Pre-Soldered for Arduino & Raspberry Pi

SKU YZ262

$13.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

GT-U7 NEO-6M GPS module delivers real-time UART serial location data for Arduino, Raspberry Pi, and ESP32 projects in robotics, vehicle tracking, wearables, home automation, and prototyping; pre-soldered headers.

Bulk eligible

Mix any Bulk eligible products — discount applies to your total quantity across the cart.
Auto-applied at checkout
Buy 5+ $13.30 each Save 5%
Buy 10+ $12.60 each Save 10%
View all bulk eligible products →
  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
GT-U7 NEO-6M GPS Module with square antenna and micro USB port ShillehTek GT-U7 NEO-6M GPS Module Pre-Soldered for Arduino & Raspberry PiNo reviews yet $13.99 This item
Top and bottom views of Arduino Nano V3.0 Pre-Soldered CH340G ATmega328P board Arduino Nano V3.0 Pre-Soldered CH340G ATmega328PNo reviews yet $5.99
Blue Micro SD TF Card Adapter with metal slot and pins ShillehTek module Micro SD TF Card Adapter Reader Module SPI Interface for ArduinoNo reviews yet $4.49
ShillehTek CP2102 USB to TTL UART Serial Converter Module front view with pins CP2102 USB to TTL UART Serial Converter Module 6-Pin for Arduino, ESP32 & ESP8266No reviews yet $6.99
Total for 4 items
$31.46

Products related to this item

433MHz 12V 1-Channel Relay Module and black wireless remote key fob
No reviews yet433MHz 12V 1-Channel Relay Module with Wireless Remote $9.99
ST-LINK V2 blue programmer/debugger with rainbow connector cables for STM8 & STM32
No reviews yetST-LINK V2 Programmer/Debugger for STM8 & STM32 $5.99
ESP-WROOM-32 ESP32 Dev Board with CP2102 USB-C connector and pins
No reviews yetESP-WROOM-32 (ESP-32S) ESP32 Dev Board CP2102 USB-C Pre-Soldered $8.99
ESP32 Dev Board 4MB CP2102 USB-C with 38 pins detailed circuit view
No reviews yetESP32 Dev Board 4MB CP2102 USB-C Pre-Soldered 38-Pin $7.99
Arduino Nano V3.0 ATmega328P 16MHz CH340C Type-C board close-up top view
★★★★★ (1) Arduino Nano V3.0 ATmega328P 16MHz CH340C Type-C Board Pre-Soldered $8.99

Overview

Product Overview

GT-U7 NEO-6M GPS module is a compact UART serial GPS receiver for adding real-time location data to Arduino, Raspberry Pi, and other microcontroller projects. Built around the NEO-6M, it outputs standard GPS data over serial for mapping, navigation, robotics, vehicle tracking, and portable data-logging applications. The board is easy to integrate for prototyping thanks to its pre-soldered headers, and it works well with Arduino sketches, Raspberry Pi Python projects, and controllers such as ESP32 that can read GPS coordinates from a serial interface. Use this GPS module when you need dependable positioning in DIY electronics, home automation, or field projects.

Questions & answers

Frequently asked questions

Yes. It outputs standard GPS data over a UART serial interface, so it can be used with Arduino sketches, Raspberry Pi Python projects, ESP32, and other controllers that can read serial GPS coordinates.
Yes. The headers are already soldered, which makes the module ready for breadboard or jumper-wire prototyping without soldering header pins first. You still need to wire power and serial connections and use suitable GPS-reading code.
It communicates over UART serial using transmit and receive lines, not I2C or SPI. Match the module’s power and logic connections to your controller’s requirements, especially when using Raspberry Pi or 3.3 V microcontrollers.
Yes. It is intended for real-time location data in mapping, navigation, robotics, vehicle tracking, and portable data-logging projects. A microcontroller or computer reads the serial GPS output and stores or processes the coordinates.
GPS receivers often need a clear view of the sky to acquire satellites; indoor testing, metal enclosures, or poor placement can prevent a fix. Also verify power, ground, and UART TX/RX wiring before troubleshooting code.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

NEO-6M Receiver GT-U7 uses the NEO-6M GPS receiver for real-time positioning data in embedded projects.

UART Serial Output Outputs standard GPS data over a UART serial interface for easy integration with microcontrollers and SBCs.

Board Compatibility Works with Arduino, Raspberry Pi, and ESP32 systems that can read GPS coordinates over serial.

Project Uses Suitable for mapping, navigation, robotics, vehicle tracking, and portable data logging applications.

Prototype Ready Pre-soldered headers make the module easier to connect for fast prototyping and testing.

Compact GPS Module Compact GT-U7 form factor fits DIY electronics, home automation, and field-deployed location projects.

Reference

Documents

Full Product Manual GT-U7 NEO-6M GPS Module Pre-Soldered for Arduino & Raspberry Pi | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Datasheet

Datasheet

Watch

Related Videos

Verified buyers

Customer Reviews