Raspberry Pi Tutorials

Build a Raspberry Pi MPU6050 low-pass filter in MicroPython to smooth noisy accelerometer readings and keep stable, u...

Build a Raspberry Pi Pico + BME280 CircuitPython project that prints temperature, humidity, pressure, and estimated a...

Install CircuitPython on a Raspberry Pi Pico or Pico W using Thonny, then run a blink test to confirm your board is r...

Connect a Raspberry Pi Pico to a BME280 and read temperature, pressure, and humidity in CircuitPython using Adafruit ...

Build a Raspberry Pi Pico HC-SR04 distance sensor project in MicroPython to get reliable ultrasonic readings fast for...

Build a Pico W + HC-SR04 RGB (RUS-04) distance sensor in MicroPython, using WS2812 control to change LED colors by di...

Build a Pico W MPU9250 compass in MicroPython to compute a stable heading angle using calibration, low-pass filtering...

Wire a Raspberry Pi Pico to a capacitive soil moisture sensor and read raw analog values, so you can calibrate later ...

Calibrate an MPU6050 IMU on a Raspberry Pi Pico W with MicroPython to compute offsets and improve gyro and accelerome...

Build a Raspberry Pi Pico + BME280 MicroPython sensor reader to measure temperature, humidity, and pressure quickly f...

Build a Raspberry Pi Pico (or Pico W) + MPU6050 setup to read acceleration, gyro, and temperature in Thonny for fast ...

Build a Raspberry Pi Pico W MicroPython SMS sender using the Twilio API over WiFi, avoiding large libraries and keepi...