The ShillehTek ADXL345 Accelerometer Sensor is a compact 3-axis accelerometer that measures motion, tilt, and vibration for Arduino and Raspberry Pi projects, and it is especially popular with Klipper 3D printer setups for resonance testing and input shaping. It supports I2C and SPI, making it easy to integrate with a wide range of boards. Use it for 3D printer tuning, vibration analysis, motion detection, orientation sensing, and robotics projects where you need reliable acceleration data.
The ShillehTek ADXL345 Accelerometer Sensor is a compact 3-axis accelerometer that measures motion, tilt, and vibration for Arduino and Raspberry Pi projects, and it is especially popular with Klipper 3D printer setups for resonance testing and input shaping. It supports I2C and SPI, making it easy to integrate with a wide range of boards. Use it for 3D printer tuning, vibration analysis, motion detection, orientation sensing, and robotics projects where you need reliable acceleration data.
No additional feature info available.
No documents available. Please contact us for more information.
Product Overview
Product Overview
The ShillehTek ADXL345 Accelerometer Sensor is a compact 3-axis accelerometer that measures motion, tilt, and vibration for Arduino and Raspberry Pi projects, and it is especially popular with Klipper 3D printer setups for resonance testing and input shaping. It supports I2C and SPI, making it easy to integrate with a wide range of boards. Use it for 3D printer tuning, vibration analysis, motion detection, orientation sensing, and robotics projects where you need reliable acceleration data.
Features & Specs
Features & Specs
Documents
Documents
Related Videos
Related Videos
Customer Reviews
Based on 64 reviews
78%
(50)
9%
(6)
8%
(5)
0%
(0)
5%
(3)
永
壊れていた
八
部品と基盤はきれいで、頑丈にはんだ付けされている。
B
I was able to use this to tune my 3d printer
D
Unable to use in accelerometer project. Others are too expensive. Desirable presoldered with arduino lib file.
S
The device can be discovered by the beaglebone. Even beaglebone supports ADXL345(Check screenshot). Best part was, it was even discovered by i2cdetect on a address. However, never got any data as per the datasheet where I should get x, y and z axis values from address 0x32-0x37(Check the screenshot). Tried moving around the device, but no luck. I ordered another one as a replacement to check if it's really not gonna work with beaglebone or not. May be the device was damaged. If it still does not work for beaglebone with the replacement, then I am out of luck with this PCB. I will update what happensUpdate:It works with beaglebone as well. No issue at all. May be the first one was damaged or had some issues. Recommended. Good product for the price.
F
I picked this up to convert my CR-10 mini and bring it up to modern day standards. Shortly after getting this, I ended up buying an X1C anyways which sort of eliminated the need for this device. Prior to getting the new printer though, I did start setting up a test fit using an rPi and Klipper.Be sure to do all of your research before messing with your printer in this fashion as you can end up bricking the motherboard altogether if you don't flash it right or otherwise.The pi was able to see the data coming back form the ADXL345 which klipper would be able to use for various purposes. There are quite a number of 3d models for mounting this to various printers.Highly recommend this if you're going through the journey of bringing a printer to modern day specs. Its can be a long one but its worth it once complete.
J
This module did a good job of making this device more accessible. I found it easy to work with.
z
Connected easily up to RaspPi4. Ran test just fine. Worked exactly as advertised.
d
Bought this to do resonance testing on my 3D printer through klipper works great.
C
Used to calibrate my 3d printer inout shaping. It worked without any problems.
Customer Reviews
Based on 64 reviews
78%
(50)
9%
(6)
8%
(5)
0%
(0)
5%
(3)
永
壊れていた
八
部品と基盤はきれいで、頑丈にはんだ付けされている。
B
I was able to use this to tune my 3d printer
D
Unable to use in accelerometer project. Others are too expensive. Desirable presoldered with arduino lib file.
S
The device can be discovered by the beaglebone. Even beaglebone supports ADXL345(Check screenshot). Best part was, it was even discovered by i2cdetect on a address. However, never got any data as per the datasheet where I should get x, y and z axis values from address 0x32-0x37(Check the screenshot). Tried moving around the device, but no luck. I ordered another one as a replacement to check if it's really not gonna work with beaglebone or not. May be the device was damaged. If it still does not work for beaglebone with the replacement, then I am out of luck with this PCB. I will update what happensUpdate:It works with beaglebone as well. No issue at all. May be the first one was damaged or had some issues. Recommended. Good product for the price.
F
I picked this up to convert my CR-10 mini and bring it up to modern day standards. Shortly after getting this, I ended up buying an X1C anyways which sort of eliminated the need for this device. Prior to getting the new printer though, I did start setting up a test fit using an rPi and Klipper.Be sure to do all of your research before messing with your printer in this fashion as you can end up bricking the motherboard altogether if you don't flash it right or otherwise.The pi was able to see the data coming back form the ADXL345 which klipper would be able to use for various purposes. There are quite a number of 3d models for mounting this to various printers.Highly recommend this if you're going through the journey of bringing a printer to modern day specs. Its can be a long one but its worth it once complete.
J
This module did a good job of making this device more accessible. I found it easy to work with.
z
Connected easily up to RaspPi4. Ran test just fine. Worked exactly as advertised.
d
Bought this to do resonance testing on my 3D printer through klipper works great.
C
Used to calibrate my 3d printer inout shaping. It worked without any problems.
