ShillehTek IoT & Beyond

Build a rechargeable 5 V breadboard power module using a TP4056 charger, 18650 cell, and boost converter so Arduino p...

Wire an Arduino to a NEO-6M GPS module, install TinyGPS++, and stream live latitude and longitude to Serial for easy ...

Build Raspberry Pi Pico W BLE peripheral and central in MicroPython to stream and read on-board temperature using aio...

Build Arduino NRF24L01 wireless communication between two boards over SPI, send text, control LEDs, and tune range fo...

Build an Arduino Uno WCS1700 current sensor project to measure isolated DC and AC current up to 70A and view real-tim...

Build an Arduino Uno distance meter using the VL53L0X ToF sensor and SSD1306 OLED to display real-time millimeter rea...

Build an Arduino UNO project with a TCRT5000 IR line tracking sensor to read analog reflectance values in the serial ...

Project Overview W1209 Temperature Relay Controller Guide: In this tutorial, you will learn how to...

Build an Arduino Uno + MFRC522 (RC522) RFID access control system that reads card UIDs and prints authorized or denie...

Set up Arduino IDE with the Sduino core to program an STM8S dev board using an ST-Link V2 over SWIM, then upload a bl...

Build an LM2596 buck converter power distribution setup to supply stable voltages to Arduino, servos, and 3.3V module...

Build an Arduino Uno 1602 LCD Keypad Shield UI to read button presses, scroll text, and render custom characters for ...