Three 5x7cm copper prototype PCB boards stacked for Arduino and Pi DIY electronics

5x7cm Copper Prototype PCB Board 3-Pack for Arduino & Pi DIY Electronics

SKU 70-WXXX-BDJK

$6.25 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

ShillehTek 5x7cm copper-clad prototype PCB boards (3 pcs) for Arduino and Raspberry Pi DIY projects — pre-drilled grid layout enables easy soldering and compact custom circuit prototyping.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
Three 5x7cm copper prototype PCB boards stacked for Arduino and Pi DIY electronics 5x7cm Copper Prototype PCB Board 3-Pack for Arduino & Pi DIY Electronics ★★★★★ (1) $6.25 This item
Set of ShillehTek 20pcs 1x40 female header pins 2.54mm for Arduino Pi 20pcs 1x40 Female Header Pins 2.54mm for Arduino, Raspberry Pi & ESP32 ★★★★★ (36) $7.50
Single ShillehTek 1x40 male pin header with 2.54mm pitch for Arduino Pi 10-Pack 1x40 Male Pin Header 2.54mm for Arduino & Raspberry Pi ★★★★★ (36) $5.25
Roll of 1/4 watt 1% metal film resistors with blue bodies and color bands taped for electronics use 820PCS 1/4W 1% Metal Film Resistors Kit, 41 Values, 20pcs Each (Plastic Box)No reviews yet $8.99
Total for 4 items
$27.99

Products related to this item

ShillehTek 400-point small solderless breadboard in packaging with grid background
★★★★★ (13) 400-Point Small Solderless Breadboard for Arduino, Raspberry Pi & ESP32 $4.99
Front view of ShillehTek 830-point solderless breadboard in retail packaging
★★★★★ (13) 830 Point Solderless Breadboard for Arduino, Raspberry Pi & ESP32 $6.99
Raspberry Pi Pico 2 W with MPU6050 sensors jumper wires and breadboard kit
No reviews yetRaspberry Pi Pico 2 W + MPU6050 6-Axis IMU Breadboard Starter Kit $29.99

Overview

Product Overview

The ShillehTek 5x7cm Copper Prototype PCB Board 3-pack is designed for Arduino, Pi and general DIY electronics, delivering a compact 5x7cm copper-clad laminate board with a universal matrix and pre-drilled holes for easy component placement and soldering; the durable copper surface supports reliable signal integrity and mechanical strength during iterative builds, the straightforward grid layout simplifies circuit routing while the multipack of three gives extra boards to prototype, refine layouts and create interconnected modules for hobbyists and makers.

Each board carries a universal 2.54 mm hole matrix with individual copper pads, so headers, DIP ICs, resistors, and modules land exactly where they would on a breadboard - then get soldered permanently for reliability no breadboard can match. The 5x7 cm size fits small enclosures and can be cut or stacked for modular builds. With three boards per pack, you can commit a prototype to solder while keeping spares for the next revision.

Questions & answers

Frequently asked questions

These boards can be used for circuits connected to Arduino, Raspberry Pi, ESP32, and other DIY electronics platforms. They are general-purpose prototype PCBs, not a plug-in shield or HAT, so connections are made by soldering and wiring your circuit manually.
The board has a universal matrix layout and pre-drilled holes, so common through-hole parts and wires can be placed and soldered without drilling. It is still a bare prototyping board, so components, headers, and jumper wires are added by the builder.
This is a passive copper-clad prototype board with no built-in voltage regulator, communication protocol, or active electronics. The electrical behavior depends on the circuit you solder onto the copper matrix, including your wiring, component ratings, and power source.
It is suited for turning breadboard-style Arduino or Pi circuits into more permanent soldered prototypes. Typical uses include small sensor wiring, module breakout connections, LED circuits, and compact DIY electronics subassemblies that need better mechanical strength than jumper wires alone.
The pack includes three 5x7cm prototype boards, giving spares for testing, revisions, or separate modules. If a circuit does not work after soldering, check for solder bridges, missed connections, reversed components, and continuity across the intended copper paths.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

Compact Size Each board measures 5x7cm for space-efficient prototyping.

Copper-Clad Laminate High-quality copper-clad construction ensures reliable signal paths.

Pre-Drilled Grid Pre-drilled holes and a clear grid layout simplify component placement.

Easy Soldering Board layout and hole spacing make soldering straightforward for beginners.

Arduino and Pi Designed for Arduino and Raspberry Pi DIY projects and modules.

Multipack Set Sold as a pack of three to support multiple prototypes or iterations.

Durable Build Rigid construction provides mechanical strength for repeated use.

Reference

Documents

Full Product Manual ShillehTek 5x7cm Copper Prototype PCB Board 3pcs for Arduino Pi DIY | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Datasheet

Watch

Related Videos

Verified buyers

Customer Reviews