Raspberry Pi Pico Tutorials

Set up adafruit-ampy to manage files and run MicroPython scripts on a Raspberry Pi Pico or Pico W from the command li...

Learn Thonny IDE file transfer to move files between your MicroPython device and local computer quickly using the Fil...

Set up Arduino IDE for Raspberry Pi Pico W to upload sketches and run WiFi ScanNetworks, with a quick RP2040 boards m...

Stream Raspberry Pi Pico BME280 readings over serial and save them to a local PC file with Python, enabling long-term...

Build a Raspberry Pi Pico W + BME280 dashboard that streams temperature, humidity, and pressure to Blynk for quick re...

Build a distributed IoT message system with Raspberry Pi Pico W and MQTT using HiveMQ Cloud in MicroPython, sending p...

Build a Raspberry Pi Pico ADXL345 I2C accelerometer reader in MicroPython to print real-time X, Y, Z values in g for ...

Set up PyCharm to flash and run MicroPython on a Raspberry Pi Pico or Pico W, then verify the workflow with an onboar...

Set up VSCode with the MicroPico extension to write and run MicroPython on a Raspberry Pi Pico W, including firmware ...

Build a Raspberry Pi MPU6050 low-pass filter in MicroPython to smooth noisy accelerometer readings and keep stable, u...

Build a Raspberry Pi Pico + BME280 CircuitPython project that prints temperature, humidity, pressure, and estimated a...

Install CircuitPython on a Raspberry Pi Pico or Pico W using Thonny, then run a blink test to confirm your board is r...