ShillehTek 1.8 inch TFT LCD display angled view with pins and red PCB

1.8" TFT LCD Display 128x160 Pre-Soldered Both Sides for Arduino & ESP32

SKU 6A-2IUA-HJQB

$14.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

1.8 inch 128x160 color TFT screen for Arduino and ESP32, pre-soldered on both sides for instant wiring and prototyping.

Bulk eligible

Mix any Bulk eligible products — discount applies to your total quantity across the cart.
Auto-applied at checkout
Buy 5+ $14.25 each Save 5%
Buy 10+ $13.50 each Save 10%
View all bulk eligible products →
  • Free UPS Ground U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
ShillehTek 1.8 inch TFT LCD display angled view with pins and red PCB 1.8" TFT LCD Display 128x160 Pre-Soldered Both Sides for Arduino & ESP32No reviews yet $14.99 This item
ESP-WROOM-32 ESP32 Dev Board with CP2102 USB-C connector and pins ESP-WROOM-32 (ESP-32S) ESP32 Dev Board CP2102 USB-C Pre-SolderedNo reviews yet $8.99
Close-up top angled view of Raspberry Pi Pico 2W with pre-soldered headers Raspberry Pi Pico 2W with Pre-Soldered HeadersNo reviews yet $14.99
Blue Micro SD TF Card Adapter with metal slot and pins ShillehTek module Micro SD TF Card Adapter Reader Module SPI Interface for ArduinoNo reviews yet $4.49
Total for 4 items
$43.46

Products related to this item

ShillehTek 2.8 inch SPI TFT LCD touch screen module with stylus pen
No reviews yetILI9341 2.8" SPI TFT LCD Touch Screen Module 240x320 for Arduino, ESP32 & STM32 $10.99
angled close-up of blue I2C OLED display module SSD1306 0.96 inch for Arduino ESP32
No reviews yetSSD1306 0.96" Blue I2C OLED Display Module 4-Pin for Arduino, Raspberry Pi & ESP32 $6.89
1.3 inch blue OLED display module with 4-pin connector ShillehTek
No reviews yet1.3" I2C Blue OLED Display Module 4-Pin SH1106 $8.99
ShillehTek MAX7219 8x8 dot matrix LED display module angled view
★★★★★ (1) MAX7219 8x8 Dot Matrix LED Display Module for Arduino, Raspberry Pi & ESP8266 $5.99
ShillehTek LCD1602 16x2 LCD display module with blue screen close-up
★★★★★ (2) LCD1602 16x2 LCD Display Module for Arduino & Raspberry Pi $7.99

Overview

Product Overview

The ShillehTek 1.8" TFT LCD Display (128x160) is a compact, colorful screen that is perfect for Arduino and ESP32 projects where you want a real visual interface instead of just LEDs. With the headers pre-soldered on both sides, it is ready to drop into breadboards, jumper wires, or stacked setups without extra soldering. These displays are commonly driven over SPI, making them fast enough for menus, sensor dashboards, animations, simple games, logos, and status screens for IoT and robotics projects.

Questions & answers

Frequently asked questions

Yes. This breakout is intended for Arduino and ESP32 projects and is typically controlled through SPI-capable pins. Use a compatible TFT display library and configure it for the display controller and 128x160 resolution.
Yes. Headers are pre-soldered on both sides, so the display can plug into breadboards, jumper-wire builds, or stacked arrangements without extra soldering. That makes it easier to prototype before designing a permanent mount.
The display is commonly driven over SPI, using the board’s SPI signals plus power and display control connections defined by your wiring and library. SPI is suitable for compact color menus, graphics, and status updates.
It is well suited for small visual interfaces such as sensor dashboards, device status screens, IoT menus, simple animations, logos, robotics readouts, and basic games. The 128x160 color resolution provides more feedback than LEDs or text-only indicators.
Check power and ground first, then verify SPI wiring, chip-select/control pins, and the display settings in your code. A blank screen is often caused by mismatched pin definitions, an incompatible library configuration, or incorrect display initialization.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

128x160 Color TFT Display Sharp, colorful output for menus, dashboards, animations, and project UIs.

Pre-Soldered Both Sides Ready for breadboards and quick wiring, no soldering required.

SPI Interface Fast, common display interface with wide Arduino and ESP32 library support.

Perfect for IoT + Robotics UIs Show sensor readings, device status, logos, and alerts in real time.

Great for Fun Demos Ideal for simple games, pixel art, and splash screens that make projects look polished.

Reference

Documents

Full Product Manual ShillehTek 1.8" TFT LCD Display 128x160 for Arduino ESP32 (Pre-soldered Both Sides) | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Datasheet

Watch

Related Videos

Verified buyers

Customer Reviews