ECG electrode pads front and back view with size dimensions for AD8232 heart rate and ECG sensor

ECG Electrode Pads 5-Pack for AD8232 Heart Rate & ECG Sensor

Name: ECG Electrode Pads 5-Pack for AD8232 Heart Rate & ECG Sensor
Brand: ShillehTek
SKU: AC254
Price: 4.99 USD
Availability: InStock

SKU AC254

$4.99 USD Shipping & tax calculated at checkout

In stock· Order by 3pm ET and it ships today

Replacement ECG electrode pads 5-pack for AD8232 heart rate and ECG sensor modules, providing reliable skin contact for bioelectric signal monitoring in wearables, fitness trackers, and biomedical prototyping.

Free Ground Shipping U.S. orders $35+
Ships from USA Domestic fulfillment
30-day returns Free defect replacement
7-day support Fast email replies

Frequently bought together

ECG Electrode Pads 5-Pack for AD8232 Heart Rate & ECG SensorNo reviews yet $4.99 This item

ShillehTek VL53L1X pre-soldered time-of-flight distance sensor module, angled top view showing VCC, GND, SCL, SDA, GPIO1 and XSHUT pin labels

VL53L1X Pre-Soldered Time-of-Flight Laser Distance Sensor 400cm for Arduino, Raspberry Pi & ESP32No reviews yet $14.99

HC-12 433MHz long-range wireless serial transceiver module with coil antenna for Arduino Raspberry Pi ESP32

HC-12 433MHz Long-Range Wireless Serial Transceiver Module (SI4438) for Arduino, Raspberry Pi & ESP32No reviews yet $12.99

MQ-7 carbon monoxide gas sensor module with blue PCB and metal mesh sensor for Arduino and ESP32

MQ-7 Carbon Monoxide (CO) Gas Sensor Module for Arduino, Raspberry Pi & ESP32No reviews yet $6.99

Total for 4 items

$39.96

Products related to this item

Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32

No reviews yetTB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32 $5.99

Close-up view of AMG8833 8x8 IR thermal imaging camera sensor module with pre-soldered pins

No reviews yetAMG8833 Pre-Soldered 8x8 IR Thermal Imaging Camera Sensor for Arduino, Raspberry Pi & ESP32 (Pre-Soldered) $27.99

MP3-TF-16P mini MP3 player module with TF card slot and pin headers for Arduino and Raspberry Pi

No reviews yetMP3-TF-16P Mini MP3 Player Module with TF Card Slot for Arduino & Raspberry Pi $6.99

No reviews yetMQ-7 Carbon Monoxide (CO) Gas Sensor Module for Arduino, Raspberry Pi & ESP32 $6.99

NEO-M8N GPS module with antenna and battery for Arduino Raspberry Pi and ESP32 projects

★★★★★ (1) NEO-M8N GPS Module with Antenna & Battery for Arduino, Raspberry Pi & ESP32 $16.99

Analog TDS water quality sensor module with probe and connecting cables for Arduino Raspberry Pi ESP32

No reviews yetAnalog TDS Water Quality Sensor Module for Arduino, Raspberry Pi & ESP32 $8.99

Overview

Product Overview

ECG electrode pads in a convenient 5-pack are disposable adhesive sensor pads for use with the AD8232 heart rate and ECG sensor, giving biosignal projects a clean, repeatable skin contact point for capturing heart activity. Designed to snap onto standard ECG lead cables, they are ideal for biomedical prototyping, wearable health experiments, heart rate monitoring builds, and classroom demonstrations with Arduino, Raspberry Pi, and ESP32. Keeping spare ECG pads on hand helps maintain consistent signal quality, since the adhesive and conductive gel lose performance after repeated use. Intended for hobby, educational, and prototyping use, not for medical diagnosis.

Questions & answers

Frequently asked questions

Are these ECG pads compatible with the AD8232 sensor?

Yes, these ECG electrode pads are specifically designed for use with the AD8232 heart rate and ECG sensor, providing a reliable connection for capturing heart activity in biomedical prototyping projects.

Do I need to solder anything to use these ECG pads?

No soldering is required to use these ECG electrode pads. They snap directly onto standard ECG lead cables, offering a convenient and ready-to-use solution for interfacing with the AD8232 sensor.

What leads do these ECG pads connect to?

These ECG electrode pads are designed to snap onto standard ECG lead cables, ensuring a secure and reliable connection for capturing accurate biosignals during heart monitoring projects.

Can these ECG pads be used for heart rate monitoring with Raspberry Pi?

Yes, these electrode pads can be used in heart rate monitoring projects with Raspberry Pi, Arduino, or ESP32, enabling easy integration into wearable health experiments and classroom demonstrations with the AD8232 sensor.

What should I do if the ECG pads lose adhesiveness?

Replace the pads to maintain signal quality. The adhesive and conductive gel degrade over time, affecting performance. Keep spares on hand for uninterrupted prototyping, as the 5-pack allows for timely replacements when needed.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included