Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32

TB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32

SKU NA272

$5.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

TB6612FNG dual H-bridge motor driver module controls 2 brushed DC motors or 1 stepper via GPIO/PWM with Arduino, Raspberry Pi, and ESP32; pre-soldered for robotics, home automation, and prototyping.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32 TB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32No reviews yet $5.99 This item
N20 micro metal gear motor with visible brass gears and silver motor casing for robotics and DIY projects N20 Micro Metal Gear Motor 12V 100RPM for Robotics & DIY ProjectsNo reviews yet $8.99
Pan-tilt servo bracket kit components including black plastic mounts, servo arms, screws, nuts, and brass inserts for SG90 and MG90S servos Pan-Tilt Servo Bracket Kit for SG90 & MG90S Micro ServosNo reviews yet $3.99
VL53L1X Pre-Soldered Time-of-Flight Laser Distance Sensor 400cm for Arduino, Raspberry Pi & ESP32 VL53L1X Pre-Soldered Time-of-Flight Laser Distance Sensor 400cm for Arduino, Raspberry Pi & ESP32No reviews yet $14.99
Total for 4 items
$33.96

Products related to this item

N20 micro metal gear motor with visible brass gears and silver motor casing for robotics and DIY projects
No reviews yetN20 Micro Metal Gear Motor 12V 100RPM for Robotics & DIY Projects $8.99
3DOF DIY robot arm kit with metal parts, 3 MG995 servos, and mounting hardware for assembly
No reviews yet3DOF DIY Robot Arm Kit with 3x MG995 Servos $44.99
Compact blue RC servo tester and CCPM consistency checker with yellow adjustment knob and multiple pin connectors
No reviews yetRC Servo Tester & CCPM Consistency Checker $7.99
1-channel 5V solid state relay module with blue screw terminals for Arduino Raspberry Pi ESP32
No reviews yet1-Channel 5V Solid State Relay Module (Low-Level Trigger) for Arduino, Raspberry Pi & ESP32 $5.99
VL53L1X Pre-Soldered Time-of-Flight Laser Distance Sensor 400cm for Arduino, Raspberry Pi & ESP32
No reviews yetVL53L1X Pre-Soldered Time-of-Flight Laser Distance Sensor 400cm for Arduino, Raspberry Pi & ESP32 $14.99
JSN-SR04T Waterproof Ultrasonic Distance Sensor Module for Arduino, Raspberry Pi & ESP32
No reviews yetJSN-SR04T Waterproof Ultrasonic Distance Sensor Module for Arduino, Raspberry Pi & ESP32 $8.99

Overview

Product Overview

TB6612FNG dual DC and stepper motor driver module is a compact motor control board for driving two brushed DC motors independently or one stepper motor from microcontroller projects. Based on the TB6612FNG chip, this H-bridge driver works with Arduino, Raspberry Pi, and ESP32 using standard GPIO and PWM control signals to set direction, brake, coast, and vary speed for wheels, pumps, sliders, pan-tilt systems, and other motion projects. The pre-soldered module is ideal for robotics, home automation, STEM builds, and prototyping when you need clean, straightforward motor interfacing without designing a driver stage from scratch.

Questions & answers

Frequently asked questions

Yes, the TB6612FNG motor driver module is compatible with Raspberry Pi. It interfaces using standard GPIO and PWM control signals, making it suitable for various motor control tasks on the Raspberry Pi platform.
The TB6612FNG module is pre-soldered for easy setup with Arduino, Raspberry Pi, and ESP32. Simply connect the GPIO and PWM pins to your microcontroller to manage motor direction and speed without additional soldering.
The TB6612FNG motor driver operates within standard voltage levels typical for such modules. Make sure to consult the specific TB6612FNG datasheet for safe operating ranges relative to your project requirements.
Yes, the TB6612FNG driver is ideal for projects like pan-tilt camera systems. It can drive two DC motors for precise control over camera movement, enhancing functionality in robotics and home automation projects.
Ensure all wiring connections are secure and that the GPIO and PWM signals from your microcontroller are correctly configured. Verify power supply compatibility and check for functional modules only within specified electrical limits.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

TB6612FNG ChipUses the TB6612FNG dual H-bridge motor driver chip for compact motor control.

Motor SupportDrives two brushed DC motors independently or one stepper motor from a single module.

GPIO PWM ControlWorks with standard GPIO and PWM signals for direction control and variable motor speed.

Drive ModesSupports direction, brake, and coast functions for flexible motion control.

Board CompatibilityCompatible with Arduino, Raspberry Pi, and ESP32 microcontroller projects.

Project Use CasesSuitable for robotics, wheels, pumps, sliders, pan-tilt systems, STEM builds, and home automation projects.

Pre Soldered ModulePre-soldered for straightforward prototyping without designing a separate motor driver stage.

Verified buyers

Customer Reviews