N20 micro metal gear motor with visible brass gears and silver motor casing for robotics and DIY projects

N20 Micro Metal Gear Motor 12V 100RPM for Robotics & DIY Projects

SKU ND015

$8.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

12V N20 DC micro metal gear motor with 100RPM geared output for robotics, actuators, smart locks, mini conveyors, and Arduino, Raspberry Pi, or ESP32 prototyping via H-bridge.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
N20 micro metal gear motor with visible brass gears and silver motor casing for robotics and DIY projects N20 Micro Metal Gear Motor 12V 100RPM for Robotics & DIY ProjectsNo reviews yet $8.99 This item
Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32 TB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32No reviews yet $5.99
Compact blue RC servo tester and CCPM consistency checker with yellow adjustment knob and multiple pin connectors RC Servo Tester & CCPM Consistency CheckerNo reviews yet $7.99
IRF520 MOSFET driver module with blue terminal blocks and three-pin header for Arduino and ESP32 IRF520 MOSFET Driver Module for Arduino, Raspberry Pi & ESP32No reviews yet $3.99
Total for 4 items
$26.96

Products related to this item

Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32
No reviews yetTB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32 $5.99
1-channel 5V solid state relay module with blue screw terminals for Arduino Raspberry Pi ESP32
No reviews yet1-Channel 5V Solid State Relay Module (Low-Level Trigger) for Arduino, Raspberry Pi & ESP32 $5.99
IRF520 MOSFET driver module with blue terminal blocks and three-pin header for Arduino and ESP32
No reviews yetIRF520 MOSFET Driver Module for Arduino, Raspberry Pi & ESP32 $3.99
3DOF DIY robot arm kit with metal parts, 3 MG995 servos, and mounting hardware for assembly
No reviews yet3DOF DIY Robot Arm Kit with 3x MG995 Servos $44.99
ZMPT101B AC single-phase voltage sensor module with blue transformer and green terminal block for Arduino and ESP32
No reviews yetZMPT101B AC Single-Phase Voltage Sensor Module for Arduino, Raspberry Pi & ESP32 $6.99
MQ-7 carbon monoxide gas sensor module with blue PCB and metal mesh sensor for Arduino and ESP32
No reviews yetMQ-7 Carbon Monoxide (CO) Gas Sensor Module for Arduino, Raspberry Pi & ESP32 $6.99

Overview

Product Overview

N20 Micro Metal Gear Motor is a compact 12V DC gearmotor that delivers a geared 100RPM output for small robots, drive systems, actuators, and DIY mechanisms where controlled rotational motion matters more than raw speed. Built around the popular N20 form factor, it fits tight spaces in robotics, model builds, smart locks, mini conveyors, and custom prototypes, and its compact size suits space-constrained enclosures and battery-powered builds. Use it with Arduino, Raspberry Pi, or ESP32 projects through a suitable motor driver or H-bridge to power wheels, linkages, and moving assemblies in education, prototyping, and home automation builds.

Questions & answers

Frequently asked questions

Yes, the N20 Micro Metal Gear Motor is compatible with Arduino, Raspberry Pi, and ESP32. However, you'll need a suitable motor driver or H-bridge to interface the motor with these platforms for controlled operation.
The N20 Micro Metal Gear Motor requires connection to a motor driver or H-bridge for use with microcontroller platforms. Ensure your setup follows the power and control requirements for safe and efficient operation.
The N20 Micro Metal Gear Motor operates at 12V DC. Ensure your power supply matches this requirement to maintain optimal performance and avoid damage to the motor.
Yes, the N20 Motor is suitable for robotic actuators in small robots and drive systems where controlled rotational motion is needed. Its compact size and 100RPM output make it ideal for educational and prototyping projects.
If the N20 Motor doesn't work after purchase, verify your connections and power supply. If issues persist, take advantage of ShillehTek's 30-day returns policy for support or a replacement.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

12V DC Motor12V DC micro metal gear motor with a geared 100RPM output for controlled rotational motion.

N20 Form FactorPopular N20 size fits tight spaces in compact robots, enclosures, and custom mechanisms.

Robotics ApplicationsSuitable for small robots, drive systems, actuators, smart locks, and mini conveyors.

Controller CompatibilityWorks with Arduino, Raspberry Pi, and ESP32 projects when used with a suitable motor driver or H-bridge.

DIY Motion BuildsUseful for powering wheels, linkages, and moving assemblies in education, prototyping, and home automation projects.

Compact DesignCompact construction suits space-constrained layouts and battery-powered DIY builds.

Verified buyers

Customer Reviews