IRF520 MOSFET driver module with blue terminal blocks and three-pin header for Arduino and ESP32

IRF520 MOSFET Driver Module for Arduino, Raspberry Pi & ESP32

SKU NA078

$3.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

IRF520 MOSFET driver module for switching DC motors, LEDs and other high-current loads with Arduino, Raspberry Pi and ESP32; ideal for robotics, home automation and prototyping.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
IRF520 MOSFET driver module with blue terminal blocks and three-pin header for Arduino and ESP32 IRF520 MOSFET Driver Module for Arduino, Raspberry Pi & ESP32No reviews yet $3.99 This item
Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32 TB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32No reviews yet $5.99
N20 micro metal gear motor with visible brass gears and silver motor casing for robotics and DIY projects N20 Micro Metal Gear Motor 12V 100RPM for Robotics & DIY ProjectsNo reviews yet $8.99
Pan-tilt servo bracket kit components including black plastic mounts, servo arms, screws, nuts, and brass inserts for SG90 and MG90S servos Pan-Tilt Servo Bracket Kit for SG90 & MG90S Micro ServosNo reviews yet $3.99
Total for 4 items
$22.96

Products related to this item

Close-up of TB6612FNG motor driver chip and soldered pins on red PCB for Arduino and ESP32
No reviews yetTB6612FNG Pre-Soldered Dual DC & Stepper Motor Driver Module for Arduino, Raspberry Pi & ESP32 $5.99
1-channel 5V solid state relay module with blue screw terminals for Arduino Raspberry Pi ESP32
No reviews yet1-Channel 5V Solid State Relay Module (Low-Level Trigger) for Arduino, Raspberry Pi & ESP32 $5.99
4-channel 5V solid state relay module with blue screw terminals and black relays for Arduino and ESP32
No reviews yet4-Channel 5V Solid State Relay Module (High-Level Trigger) for Arduino, Raspberry Pi & ESP32 $10.99
CJMCU-64 8x8 WS2812 RGB LED Matrix Module for Arduino, Raspberry Pi & ESP32
No reviews yetCJMCU-64 8x8 WS2812 RGB LED Matrix Module for Arduino, Raspberry Pi & ESP32 $6.99
MP3-TF-16P mini MP3 player module with TF card slot and pin headers for Arduino and Raspberry Pi
No reviews yetMP3-TF-16P Mini MP3 Player Module with TF Card Slot for Arduino & Raspberry Pi $6.99

Overview

Product Overview

IRF520 MOSFET driver module is a simple power switching board that lets a microcontroller pin control higher-current DC loads such as LED strips, motors, pumps, solenoids, and fans without driving them directly. Built around the IRF520 N-channel MOSFET, it accepts a PWM or on/off logic signal from Arduino, Raspberry Pi, and ESP32 boards and switches the load side, making it useful for dimming, speed control, and general power gating in robotics, home automation, and prototyping. This MOSFET switch module is a practical choice for DIY electronics projects that need straightforward DC load control from a low-current GPIO signal.

Questions & answers

Frequently asked questions

Yes, the IRF520 MOSFET driver module is compatible with Raspberry Pi. It can use GPIO pins from the Raspberry Pi for controlling higher-current DC loads with PWM or on/off logic signals.
To set up the IRF520 module, connect the microcontroller GPIO to the input and the DC load to the output. It's designed for easy use with pre-soldered headers and works immediately with compatible boards like Arduino and ESP32.
The IRF520 MOSFET module can handle logic signal inputs from microcontrollers for load switching but is designed to control higher-voltage DC loads. Specific voltage specifications should be checked in datasheets for safe usage.
Yes, the IRF520 MOSFET module is suitable for controlling DC motors. It allows projects like speed control in robotics by adjusting the PWM signal from devices like Arduino, Raspberry Pi, or ESP32.
Ensure all connections are secure and correctly oriented. Verify that your microcontroller pin is correctly sending the PWM or logic signal. If issues persist, check for shorts or incorrect voltage loads on the output side.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

IRF520 MOSFETUses an IRF520 N-channel MOSFET for microcontroller-controlled DC load switching.

GPIO ControlOperates from a standard digital GPIO signal rather than I2C, SPI, or UART.

Board CompatibilityCompatible with Arduino, Raspberry Pi, ESP32, and other GPIO-based development boards.

PWM ReadySupports PWM control for applications such as dimming and speed adjustment from compatible output pins.

DC Load SwitchingLets a low-power controller switch higher-power DC devices in embedded projects.

Project Use CasesSuitable for LED, motor, relay, pump, and other DC switching applications.

Verified buyers

Customer Reviews