KY-006 Passive Piezo Buzzer Module for Arduino
$5.99 USD
Shipping
& tax calculated at checkout
In stock· Order by 3pm ET and it ships today
Passive piezo buzzer module for Arduino that plays tones and melodies using PWM for alarms and sound feedback.
- Free UPS Ground U.S. orders $35+
- Ships from USA Domestic fulfillment
- 30-day returns Free defect replacement
- 7-day support Fast email replies
Frequently bought together
KY-006 Passive Piezo Buzzer Module for ArduinoNo reviews yet
$5.99
This item
Total for 4 items
$24.97
Products related to this item
★★★★★
(54)
BME280 Pre-Soldered Temperature, Pressure & Humidity Sensor for Arduino & Raspberry Pi
$9.98
No reviews yetJoystick Shield V1.A 2-Axis Analog Gamepad Controller for Arduino UNO R3
$6.99
No reviews yetKY-023 Dual Axis PS2 Analog Joystick Module for Arduino & ESP32
$4.99
★★★★★
(27)
BH1750 Pre-Soldered Digital Light Sensor for Arduino & Raspberry Pi
$6.98
★★★★★
(40)
BMP180 Pre-Soldered Pressure & Temperature Sensor for Arduino & Raspberry Pi
$6.25
★★★★★
(43)
BMP280 Pre-Soldered Pressure & Temperature Sensor for Arduino & Raspberry Pi
$7.00
★★★★★
(28)
DHT11 Temperature & Humidity Sensor for Arduino & Raspberry Pi
$6.00
★★★★★
(28)
DHT22 Temperature & Humidity Sensor for Arduino & Raspberry Pi
$8.00
★★★★★
(23)
HC-SR501 PIR Motion Sensor for Arduino & Raspberry Pi
$7.00
★★★★★
(29)
KY-037 Sound Sensor Module for Arduino & ESP32
$6.49
Overview
Product Overview
The KY-006 Passive Piezo Buzzer Module is a simple sound output module for Arduino projects that lets you generate beeps, tones, and melodies by driving it with a PWM signal. Because it is passive, you can control the frequency yourself, which makes it great for alarms, timers, button feedback, sensor alerts, and fun sound effects in STEM builds. It is a quick way to add audio feedback to projects without needing a speaker amplifier.
Questions & answers
Frequently asked questions
It is designed for Arduino sound-output projects and can also be used with Raspberry Pi or other controllers that can drive a GPIO/PWM signal. Code support and wiring depend on the board you use.
The module is intended for quick breadboard or jumper-wire setup, with pre-soldered headers from ShillehTek. Connect signal, power, and ground, then drive the signal pin from your controller; no speaker amplifier is needed.
This is a passive piezo buzzer, so it needs a changing drive signal such as PWM or a tone output. The tone frequency comes from your code; a steady DC signal will not create normal melodies.
Common uses include alarms, countdown timers, button-click feedback, sensor alerts, and simple melodies in STEM builds. It is useful when a project needs basic audio feedback without adding a speaker and amplifier circuit.
Check that the signal, power, and ground connections match your board, and confirm your code is generating PWM or tone output. Because it is passive, test code written for an active buzzer may not work correctly.
Have other questions?
Chat with our US-based team — we usually reply fast.
What's included
Features & Specs
Reference
Documents
Full Product Manual ShillehTek KY-006 Passive Piezo Buzzer Alarm Module for Arduino Projects | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.Watch
Related Videos
Verified buyers