XL4015 adjustable DC-DC step-down module with digital voltmeter display and blue terminal blocks

XL4015 Adjustable DC-DC Step-Down Module 5A 75W with Digital Voltmeter Display

SKU AA451

$7.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

XL4015 adjustable DC-DC step-down buck converter lowers higher DC input to regulated output, 5A 75W, with digital voltmeter display for Arduino, Raspberry Pi, robotics, LED, automotive and prototyping power.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
XL4015 adjustable DC-DC step-down module with digital voltmeter display and blue terminal blocks XL4015 Adjustable DC-DC Step-Down Module 5A 75W with Digital Voltmeter DisplayNo reviews yet $7.99 This item
4 slot 18650 battery holder box with red and black wires and no cover for electronics projects 4 x 18650 Battery Holder Box with Wire (No Cover)No reviews yet $4.99
4S 30A lithium battery protection board with multiple components and connection terminals on green PCB 4S 30A 18650 Lithium Battery Protection Board 14.8V/16V with CableNo reviews yet $6.99
5 meter roll of WS2812B non-waterproof SMD LED strip with 60 LEDs per meter and connector cable WS2812B Non-Waterproof SMD LED Strip 60 LED/Meter Flexible 5M Roll 5V IP30No reviews yet $29.99
Total for 4 items
$49.96

Products related to this item

Top view of ShillehTek LM2596 step-down buck converter module with digital voltmeter
★★★★★ (8) LM2596 Step-Down Buck Converter Module with Digital Voltmeter $6.99
Pack of common diodes including 1N5399 and FR207 in labeled resealable plastic bags
No reviews yet100PCS Common Diode Kit - 1N4148, 1N4007, 1N5819 & 1N5399 $9.99

Overview

Product Overview

DC-DC step-down module built around the XL4015, this adjustable buck converter lowers a higher DC input to a regulated lower output for efficiently powering electronics, embedded projects, and test setups. Rated up to 5A 75W, it is a practical voltage regulator for DIY power supplies, battery-powered builds, LED lighting, automotive electronics, robotics, and prototyping with Arduino, Raspberry Pi, and ESP32 systems. The onboard digital voltmeter display makes it easy to monitor output voltage during setup and tuning, helping you dial in the right power for modules, sensors, motors, and other DC loads.

Questions & answers

Frequently asked questions

Yes. It can provide a regulated lower DC supply for projects using Arduino, Raspberry Pi, or ESP32, as long as the input source is higher than the desired output and the load stays within the module’s 5A 75W rating.
Yes. This version is pre-soldered, so typical setup is wiring the DC input and output, then adjusting the converter while watching the display. Always verify polarity and set the output voltage before connecting sensitive electronics.
It uses a basic DC power interface: higher-voltage DC input and regulated lower-voltage DC output. It is not an I2C, SPI, or serial data module; the onboard digital voltmeter displays output voltage for setup and monitoring.
Yes. It is suitable for LED lighting, robotics, battery-powered builds, automotive electronics, DIY power supplies, and prototyping when the project needs a lower regulated DC voltage and the connected load is within the module’s rating.
Check that the input is DC, higher than the desired output, and connected with correct polarity. Adjust the output before connecting the load, watch the onboard voltmeter, and make sure the connected device does not exceed the 5A 75W rating.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

XL4015 Buck Converter Built around the XL4015 chip, this DC-DC step-down module converts a higher DC input into a regulated lower output voltage.

Adjustable Output The adjustable buck regulator lets you tune the output voltage for different electronics, modules, and DC loads.

5A 75W Rating Rated for up to 5A and 75W, it suits higher-current power regulation in DIY and embedded projects.

Digital Voltmeter The onboard digital voltmeter display shows output voltage for faster setup, adjustment, and monitoring.

Embedded Compatibility Useful for powering Arduino, Raspberry Pi, and ESP32 projects that need a stable lower DC supply.

Project Use Cases Suitable for DIY power supplies, battery-powered builds, LED lighting, automotive electronics, robotics, and prototyping.

Reference

Documents

Full Product Manual XL4015 Adjustable DC-DC Step-Down Module 5A 75W with Digital Voltmeter Display | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Datasheet - XL4015 75W Buck Converter

Watch

Related Videos

Verified buyers

Customer Reviews