Close-up of ShillehTek Pre-Soldered BME280 sensor with purple PCB and metal pins

BME280 Pre-Soldered Temperature, Pressure & Humidity Sensor for Arduino & Raspberry Pi

SKU XD-CNO5-PS0X

$9.98 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

A compact 3-in-1 environmental sensor for Arduino and Raspberry Pi, measuring temperature, humidity, and air pressure over I2C/SPI.

Bulk eligible

Mix any Bulk eligible products — discount applies to your total quantity across the cart.
Auto-applied at checkout
Buy 5+ $9.49 each Save 5%
Buy 10+ $8.99 each Save 10%
View all bulk eligible products →
  • Free UPS Ground U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
Close-up of ShillehTek Pre-Soldered BME280 sensor with purple PCB and metal pins BME280 Pre-Soldered Temperature, Pressure & Humidity Sensor for Arduino & Raspberry Pi ★★★★★ (54) $9.98 This item
4-channel programmable relay module with blue relays and digital display ShillehTek 4-Channel Programmable Relay Module 6-24V DC Trigger Delay Timer & Motor Reversing ControllerNo reviews yet $15.99
angled close-up of blue I2C OLED display module SSD1306 0.96 inch for Arduino ESP32 SSD1306 0.96" Blue I2C OLED Display Module 4-Pin for Arduino, Raspberry Pi & ESP32No reviews yet $6.89
Blue Micro SD TF Card Adapter with metal slot and pins ShillehTek module Micro SD TF Card Adapter Reader Module SPI Interface for ArduinoNo reviews yet $4.49
Total for 4 items
$37.35

Products related to this item

ShillehTek DHT11 temperature and humidity sensor module with three pin connectors and wires
★★★★★ (28) DHT11 Temperature & Humidity Sensor for Arduino & Raspberry Pi $6.00
ShillehTek DHT22 white temperature humidity sensor with multicolor wires
★★★★★ (28) DHT22 Temperature & Humidity Sensor for Arduino & Raspberry Pi $8.00
Close-up of ShillehTek pre-soldered BMP180 pressure and temperature sensor module
★★★★★ (40) BMP180 Pre-Soldered Pressure & Temperature Sensor for Arduino & Raspberry Pi $6.25
close-up of ShillehTek pre-soldered BMP280 pressure temperature sensor PCB
★★★★★ (43) BMP280 Pre-Soldered Pressure & Temperature Sensor for Arduino & Raspberry Pi $7.00
ShillehTek DS18B20 waterproof digital temperature sensor probe with coiled black cable
No reviews yetDS18B20 Waterproof Digital Temperature Sensor Probe 1M for Arduino & Raspberry Pi $5.99
Close up of ShillehTek MLX90614 IR temperature sensor module with metal housing
★★★★★ (9) MLX90614 Pre-Soldered IR Temperature Sensor Module for Arduino & Raspberry Pi $16.49

Overview

Product Overview

The BME280 sensor module measures temperature, barometric pressure and humidity with solid accuracy in a compact, low‑power, tiny-footprint package ideal for Arduino and Raspberry Pi projects that run at 3.3V; it delivers reliable real-world environment data without a complicated setup. It integrates cleanly over I2C or SPI with widespread library support for rapid prototyping and deployed IoT dashboards. Use it for weather stations, indoor air monitoring and altitude estimation from pressure trends; its 3.3V compatibility and simple wiring make dependable sensing quick to install.

Questions & answers

Frequently asked questions

Yes. The module is intended for Arduino and Raspberry Pi projects that run at 3.3V, and it has widespread library support. It can integrate over I2C or SPI for prototyping or deployed IoT sensing.
Yes. The headers are pre-soldered, so the sensor can be connected with jumper wires or placed on a breadboard without soldering. After wiring it, install a compatible BME280 library and configure I2C or SPI in your code.
The sensor supports both I2C and SPI communication and is designed for 3.3V projects. Connect power, ground, and the selected bus pins, and use 3.3V-compatible logic unless your controller hardware specifically supports otherwise.
Yes. It measures temperature, humidity, and barometric pressure, making it useful for compact weather stations, indoor air monitoring, IoT dashboards, and altitude estimation from pressure trends when paired with a compatible microcontroller or Raspberry Pi.
Check 3.3V power, ground, SDA/SCL wiring, the I2C address selected in software, and that a compatible BME280 library is installed. On Raspberry Pi, also confirm that I2C is enabled in the system configuration.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

3-in-1 Environmental Sensing Reads temperature, humidity, and barometric pressure in one small module.

Arduino + Raspberry Pi Ready Works great for weather stations, indoor air monitoring, and IoT dashboards.

I2C or SPI Interface Flexible wiring options with wide library support and simple integration.

Pressure-Based Altitude Estimation Track altitude and elevation changes using barometric pressure readings.

3.3V Logic Module Designed for 3.3V systems (use proper level shifting if pairing with 5V boards).

Reference

Documents

Full Product Manual BME280 Environmental Sensor - Raspberry Pi, Arduino, ESP32 I2C Humidity, Pressure, and Temperature Measurement In-depth setup guide with wiring, code examples, and troubleshooting.

Datasheet

Watch

Related Videos

Verified buyers

Customer Reviews