Raspberry Pi Debug Probe kit with probe board, case, USB cable and debug leads

Raspberry Pi Debug Probe USB Debugging Kit

$22.50 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

Raspberry Pi Debug Probe USB debug kit for microcontroller SWD debugging and UART serial bridging over USB, with CMSIS-DAP/OpenOCD support, nominal 3.3 V I/O, USB cable and 3 debug cables.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Worldwide via DHL
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies

Overview

Product Overview

Raspberry Pi Debug Probe USB Debugging Kit is a USB-to-SWD and USB-to-UART debug probe that connects a computer over USB to a microcontroller’s debug or serial interface for embedded development and troubleshooting. It provides Arm Serial Wire Debug (SWD) for target debugging and a UART serial bridge for console output and device communication, with CMSIS-DAP support for tools such as OpenOCD. The probe uses nominal 3.3 V I/O, and the kit includes the probe in a case, one USB cable, and three debug cables: a 3-pin JST-SH cable plus two JST-SH-to-header cables with male and female ends for matching target connectors.

Questions & answers

Frequently asked questions

SWD connects debugging tools to a supported microcontroller. UART provides a serial connection for console output and communication.
The probe uses nominal 3.3 V I/O. Use a target interface compatible with that level; do not assume 5 V tolerance.
Yes. The kit includes a USB cable and three debug cables: a three-pin JST-SH cable and two JST-SH-to-header cables with male and female ends.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

Raspberry Pi ModelRaspberry Pi Debug Probe USB Debug Kit for connecting a computer to a microcontroller debug or serial interface.

USB Host ConnectionUses USB for the host computer connection.

SWD Debug InterfaceProvides USB-to-SWD support for Arm Serial Wire Debug.

UART Serial BridgeProvides USB-to-UART bridging for serial console output and communication.

CMSIS-DAP SupportCompatible with CMSIS-DAP tools including OpenOCD.

3.3 V I OUses nominal 3.3 V I/O for the target interface.

Kit ContentsIncludes the probe in a case, one USB cable, and three debug cables: one three-pin JST-SH cable and two JST-SH-to-header cables with male and female ends.

Pack QuantitySale unit includes 1 USB Debug Probe kit.

Verified buyers

Customer Reviews