10K slide potentiometer module with yellow slider and pin headers for Arduino and ESP32 projects showing front and back sides

10K Slide Potentiometer Module for Arduino & ESP32

SKU NA130

$5.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

10K slide potentiometer module for smooth analog voltage control and variable resistor input with Arduino, ESP32, and other ADC microcontrollers; ideal for robotics, LED dimming, home automation, and prototyping.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
10K slide potentiometer module with yellow slider and pin headers for Arduino and ESP32 projects showing front and back sides 10K Slide Potentiometer Module for Arduino & ESP32No reviews yet $5.99 This item
MEGA 2560 R3 CH340 Arduino development board with USB and power connectors angled view MEGA 2560 R3 CH340 Development Board for ArduinoNo reviews yet $18.99
Back side of 2x18650 lithium battery shield V8 with USB ports and electronic components for ESP32 and Arduino 2x18650 Lithium Battery Shield V8 5V/3A for ESP32 and ArduinoNo reviews yet $9.99
MH-Z19C NDIR infrared CO2 sensor module with multicolor wiring harness for Arduino Raspberry Pi and ESP32 MH-Z19C NDIR Infrared CO2 Sensor Module for Arduino, Raspberry Pi & ESP32No reviews yet $28.99
Total for 4 items
$63.96

Products related to this item

KY-018 photoresistor light sensor module with three pins for Arduino and ESP32 projects
No reviews yetKY-018 Photoresistor Light Sensor Module for Arduino & ESP32 $5.99
Rain and water level detection sensor module with red PCB and three pins for Arduino Raspberry Pi ESP32
No reviews yetRain and Water Level Detection Sensor Module for Arduino, Raspberry Pi & ESP32 $6.49
Ra-02 SX1278 LoRa 433MHz wireless transceiver module with metal shield and gold pins for Arduino and ESP32
No reviews yetRa-02 SX1278 LoRa 433MHz Wireless Transceiver Module for Arduino, ESP32, STM32 & Raspberry Pi $9.99
ACS712 5A current sensor module with green terminal blocks and 3-pin header for Arduino and ESP32
No reviews yetACS712 5A Current Sensor Module for Arduino & ESP32 $7.99
Pack of 10K NTC thermistor temperature sensors MF52-103 with black epoxy coating and long metal leads
No reviews yet10K NTC Thermistor Temperature Sensor (MF52-103) $1.99

Overview

Product Overview

A 10K slide potentiometer module is a variable resistor input board that converts slider position into an easy-to-read analog signal for interactive electronics projects. Built around a 10k potentiometer, it lets you adjust voltage levels smoothly for menu navigation, motor speed tuning, LED dimming, audio control, sensor calibration, and other human input tasks. This analog control module is a practical fit for Arduino, ESP32, and other microcontrollers with ADC or analog input pins, making it useful for robotics, DIY instruments, home automation panels, and rapid prototyping where precise manual adjustment is needed.

Questions & answers

Frequently asked questions

Yes, the 10K Slide Potentiometer Module is compatible with Arduino platforms. It outputs an analog signal that can be read by Arduino's analog input pins for various applications like menu navigation and motor speed tuning.
The 10K Slide Potentiometer Module is pre-soldered and ready to use. Simply connect it to your microcontroller’s analog input pins and adjust the slider to vary the voltage for your desired application.
This module operates as a variable resistor, translating slider position to an analog voltage output. It should be used within standard microcontroller voltage levels, typically 3.3V or 5V, depending on your setup.
Yes, the module can be used to dim LEDs by varying the analog signal, which can then be processed by a microcontroller to adjust the LED brightness accordingly. This allows for smooth manual adjustment of light levels.
First, check all connections to ensure the module is securely connected to your microcontroller. Ensure the slider is not at its minimum or maximum position if an output is expected, and verify your microcontroller's input configuration and code.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

10K ResistanceUses a 10k slide potentiometer for smooth manual analog adjustment.

Analog OutputConverts slider position into a variable analog voltage for ADC or analog input pins.

Microcontroller SupportWorks with Arduino, ESP32, and other microcontrollers that read analog signals.

Manual Input ControlProvides a simple user input for menu navigation, parameter tuning, and calibration tasks.

Common ApplicationsSupports LED dimming, motor speed tuning, audio control, and sensor calibration projects.

Project IntegrationFits robotics, DIY instruments, home automation panels, and rapid prototyping builds.

Reference

Documents

Full Product Manual 10K Slide Potentiometer Module for Arduino & ESP32 | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Watch

Related Videos

Verified buyers

Customer Reviews