120pcs 10cm Jumper Wire Set M-F, M-M, F-F for Arduino & Raspberry Pi
SKU SZ-M6BZ-GJ2G
$5.75 USD
Shipping
& tax calculated at checkout
In stock· Order by 3pm ET and it ships today
120-piece 10cm jumper wire kit (M-F, M-M, F-F) for clean, solder-free Arduino and Raspberry Pi prototyping.
Bulk eligible
Mix any Bulk eligible products — discount applies to your total quantity across the cart.| Buy 5+ | $5.47 each | Save 5% |
| Buy 10+ | $5.18 each | Save 10% |
- Free UPS Ground U.S. orders $35+
- Ships from USA Domestic fulfillment
- 30-day returns Free defect replacement
- 7-day support Fast email replies
Frequently bought together
120pcs 10cm Jumper Wire Set M-F, M-M, F-F for Arduino & Raspberry Pi
★★★★★
(4)
$5.75
This item
Total for 4 items
$24.72
Products related to this item
★★★★★
(9)
120pcs 20cm Dupont Jumper Wires for Arduino & Raspberry Pi
$6.25
No reviews yet50cm Double-Ended Alligator Clip Test Leads (10pcs) for Arduino & Raspberry Pi
$3.99
No reviews yet30cm 10-Pin Alligator Clip to Dupont Line - Male
$4.99
No reviews yet30cm 10-Pin Alligator Clip to Female Dupont Cable
$4.99
Overview
Product Overview
The ShillehTek 120pcs 10cm Jumper Wire Set is a compact Dupont wire kit for fast, solder-free prototyping with Arduino, Raspberry Pi, breadboards, sensors, and 2.54mm headers. It includes Male to Female, Male to Male, and Female to Female jumpers so you can connect GPIO pins to modules, bridge breadboard rows, and wire up multi-sensor builds cleanly. The 10cm length keeps wiring tidy for small projects and makes troubleshooting way easier.
Questions & answers
Frequently asked questions
Yes. These Dupont jumper wires are intended for Arduino, Raspberry Pi, breadboards, sensors, modules, and other parts that use standard 2.54mm headers, making them suitable for typical GPIO and prototyping connections.
Yes. The wires are ready to use with pre-terminated Dupont ends, so you can plug them directly into breadboards, GPIO headers, and compatible modules without soldering or crimping connectors.
These Dupont-style jumpers fit standard 2.54mm headers, which are common on Arduino-compatible boards, Raspberry Pi GPIO headers, breadboards, and many sensor modules. Match the connector gender to the pin or socket you are using.
The 10cm length is best for compact breadboard setups, GPIO-to-sensor wiring, and small multi-sensor builds where short runs keep the layout tidy and make troubleshooting easier.
Use male-to-male for breadboard sockets or Arduino-style female headers, male-to-female when one side is a male pin header, and female-to-female to connect two male pin headers. If loose, check gender and 2.54mm header fit.
Have other questions?
Chat with our US-based team — we usually reply fast.
What's included
Features & Specs
Reference
Documents
Full Product Manual ShillehTek 120pcs 10cm Jumper Wires M-F M-M F-F Arduino Pi DIY | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.Watch
Related Videos
Verified buyers
