30cm 10-pin alligator clip to female Dupont jumper cable with multicolor wires for electronics projects

30cm 10-Pin Alligator Clip to Female Dupont Cable

SKU AF020

$4.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

30cm 10-pin alligator clip to female Dupont jumper cable for breadboard, sensor, and dev board hookups. Ideal for Arduino, Raspberry Pi, ESP32 prototyping, testing, power and signal connections.

  • Free UPS Ground U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
30cm 10-pin alligator clip to female Dupont jumper cable with multicolor wires for electronics projects 30cm 10-Pin Alligator Clip to Female Dupont CableNo reviews yet $4.99 This item
Top and bottom views of Arduino Nano V3.0 Pre-Soldered CH340G ATmega328P board Arduino Nano V3.0 Pre-Soldered CH340G ATmega328PNo reviews yet $5.99
Close-up top angled view of Raspberry Pi Pico 2W with pre-soldered headers Raspberry Pi Pico 2W with Pre-Soldered HeadersNo reviews yet $14.99
Front view of ShillehTek HC-SR04 Ultrasonic Distance Sensor Module with two circular transducers HC-SR04 Ultrasonic Distance Sensor Module 4-Pin for Arduino & Raspberry PiNo reviews yet $4.49
Total for 4 items
$30.46

Products related to this item

ShillehTek 120pcs 20cm female to female Dupont wires for Arduino Raspberry Pi
★★★★★ (9) 120pcs 20cm Dupont Jumper Wires for Arduino & Raspberry Pi $6.25
ShillehTek 120pcs jumper wires set with male to female connectors multicolor
★★★★★ (4) 120pcs 10cm Jumper Wire Set M-F, M-M, F-F for Arduino & Raspberry Pi $5.75
Bundle of colorful ShillehTek 50cm alligator clips test leads double-ended jumper wires
No reviews yet50cm Double-Ended Alligator Clip Test Leads (10pcs) for Arduino & Raspberry Pi $3.99
30cm 10-pin alligator clip to male Dupont jumper wires in multiple colors for electronics testing
No reviews yet30cm 10-Pin Alligator Clip to Dupont Line - Male $4.99

Overview

Product Overview

The 30cm 10-pin alligator clip to female Dupont cable is a versatile jumper lead set for quickly connecting bare wires, component legs, test points, and small terminals to Dupont-style header pins on breadboards, sensors, and development boards. With alligator clips on one end and female Dupont connectors on the other, this cable makes temporary signal, power, and grounding hookups easy during electronics prototyping, debugging, and classroom lab work. Ideal for Arduino, Raspberry Pi, ESP32, and similar DIY electronics projects, it helps interface modules, switches, and circuits without soldering.

Questions & answers

Frequently asked questions

Yes. The female Dupont ends plug onto standard male header pins commonly used with Arduino, Raspberry Pi, ESP32, breadboards, and many sensor modules. The alligator clips are useful for grabbing bare wires, component leads, small terminals, or test points.
No soldering is needed for temporary connections. Clip one end to a wire, lead, or test point, then push the female Dupont connector onto a matching male header pin for quick prototyping, testing, or classroom lab setups.
This is a passive jumper lead set, so it does not create or regulate voltage. Use it only within the safe electrical limits of the boards, components, and header pins you connect, and avoid shorting adjacent clips or pins.
It is useful for quickly connecting switches, sensors, bare jumper wires, and module test points to a breadboard or development board. Common uses include Arduino experiments, Raspberry Pi GPIO testing, ESP32 projects, and debugging circuits before making permanent connections.
Choose this cable when you need temporary clip-to-header connections rather than permanent wiring. If a circuit is intermittent, check that each alligator clip grips clean metal securely and that each female Dupont connector is fully seated on the correct male pin.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

Cable Length 30cm 10-pin cable provides flexible reach for breadboards, sensors, and test setups.

Connector Types Alligator clips on one end and female Dupont connectors on the other link wires, leads, and header pins.

Prototyping Use Supports temporary signal, power, and ground connections during electronics prototyping and debugging.

Board Compatibility Works with Arduino, Raspberry Pi, ESP32, and other development boards using Dupont-style header pins.

Test Connections Clips onto bare wires, component legs, test points, and small terminals for quick hookup.

Module Interface Helps connect switches, modules, and simple circuits to breadboards or GPIO headers without soldering.

Reference

Documents

Full Product Manual 30cm 10-Pin Alligator Clip to Female Dupont Cable | ShillehTek Product Manual In-depth setup guide with wiring, code examples, and troubleshooting.

Watch

Related Videos

Verified buyers

Customer Reviews