P20/15 12V DC electromagnet solenoid sucker with 3KG holding force and blue wires

P20/15 12V DC Electromagnet Solenoid Sucker 3KG

SKU NC465

$8.99 USD Shipping & tax calculated at checkout
In stock· Order by 3pm ET and it ships today

12V DC electromagnet solenoid sucker P20/15 with 3KG holding force for magnetic locking, clamping, picking and release in robotics, cabinet locks, vending machines, and home automation.

  • Free Ground Shipping U.S. orders $35+
  • Ships from USA Domestic fulfillment
  • 30-day returns Free defect replacement
  • 7-day support Fast email replies
Frequently bought together
P20/15 12V DC electromagnet solenoid sucker with 3KG holding force and blue wires P20/15 12V DC Electromagnet Solenoid Sucker 3KGNo reviews yet $8.99 This item
ESP32-WROVER 4MB PSRAM WiFi and Bluetooth module showing front metal shield and back pin labels ESP32-WROVER 4MB PSRAM WiFi & Bluetooth ModuleNo reviews yet $8.99
MEGA 2560 R3 CH340 Arduino development board with USB and power connectors angled view MEGA 2560 R3 CH340 Development Board for ArduinoNo reviews yet $18.99
Three normally open reed switch magnetic sensors with long metal leads for Arduino and ESP32 projects Normally Open Reed Switch Magnetic Sensor for Arduino, Raspberry Pi & ESP32No reviews yet $1.99
Total for 4 items
$38.96

Products related to this item

TT Gear Motor 3-6V with yellow plastic casing and 1:48 gear ratio for robot car projects
No reviews yetTT Gear Motor 3-6V 1:48 125RPM for Robot Car $5.49
Two flat coin vibration motors with red and blue wires for Arduino Raspberry Pi and ESP32 projects
No reviews yet1027 Flat Coin Vibration Motor for Arduino, Raspberry Pi & ESP32 $2.99
Mini submersible water pump 5V 120L/H with dual outlet nozzles and mounting bracket
No reviews yetMini Submersible Water Pump 5V 120L/H with 1.5m Cable for Arduino, Raspberry Pi & ESP32 $8.99
PAM8406 stereo class-D audio amplifier module with capacitor and labeled pins for Arduino and ESP32
No reviews yetPAM8406 Pre-Soldered Stereo Class-D Audio Amplifier Module for Arduino, Raspberry Pi & ESP32 $7.99
Mini submersible water pump 3-5V with black and red wires for Arduino Raspberry Pi and ESP32 projects
No reviews yetMini Submersible Water Pump 3-5V for Arduino, Raspberry Pi & ESP32 $6.99
Five TEC1-12706 thermoelectric peltier cooler plates with red and black wires and thermal pads
No reviews yetTEC1-12706 Thermoelectric Peltier Cooler Plate 12V 40x40mm $9.99

Overview

Product Overview

This 12V DC electromagnet solenoid sucker is a compact holding magnet designed to create magnetic attraction for locking, picking, clamping, and release mechanisms in automation projects. Rated for 12V operation and specified for 3KG holding force, the P20/15 electromagnet is useful for cabinet locks, vending machines, smart door latches, robotics end effectors, and DIY home automation builds. Pair this solenoid magnet with a relay, transistor, or MOSFET driver to control it from Arduino, Raspberry Pi, or ESP32 systems for prototyping access control, object handling, or powered magnetic fixtures where simple on/off actuation is needed.

Questions & answers

Frequently asked questions

Yes, this 12V electromagnet solenoid can be controlled by a Raspberry Pi using a relay, transistor, or MOSFET driver to handle the 12V operation, as the GPIO pins only output 3.3V or 5V.
To set up, connect the 12V solenoid to a power source and control it using a relay or transistor driven by a microcontroller like Arduino, which allows for easy integration into automation projects.
The solenoid is rated for 12V DC operation and has a specified holding force of 3 kilograms, making it suitable for various locking and clamping applications in automation projects.
Yes, you can use this electromagnet solenoid in a smart door latch, providing sufficient holding force for locking mechanisms controlled by systems such as Arduino or Raspberry Pi.
Ensure the solenoid is connected to a stable 12V power supply. If problems persist, contact ShillehTek for support or return the product within 30 days if purchased directly from ShillehTek.

Have other questions?

Chat with our US-based team — we usually reply fast.

What's included

Features & Specs

12V DC OperationRuns on 12V DC power for compact electromagnet holding and release applications.

3KG Holding ForceProvides a rated 3KG magnetic holding force for locking, clamping, and pickup tasks.

P20/15 ModelThe P20/15 electromagnet solenoid sucker is a compact holding magnet for automation projects.

Driver ControlSwitch it with a relay, transistor, or MOSFET driver for simple on/off actuation.

Controller CompatibilitySuitable for control from Arduino, Raspberry Pi, and ESP32 systems when used with a driver stage.

Access Control UseUseful for cabinet locks, smart door latches, and vending machine mechanisms.

Robotics FixturesWorks for robotics end effectors, object handling, and powered magnetic fixtures.

Watch

Related Videos

Verified buyers

Customer Reviews