{"title":"Raspberry Pi Compatible","description":"\u003cp\u003eElectronics and modules that work with Raspberry Pi single-board computers and Raspberry Pi Pico — sensors, relays, displays, converters and prototyping gear.\u003c\/p\u003e","products":[{"product_id":"mpu-6050-pre-soldered-6-dof-accelerometer","title":"MPU6050 Pre-Soldered IMU Accelerometer Sensor 2-Pack for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-end=\"83\" data-start=\"27\"\u003eShillehTek MPU6050 IMU Accelerometer Sensor (2-pack)\u003c\/strong\u003e combines a \u003cstrong data-end=\"119\" data-start=\"95\"\u003e3-axis accelerometer\u003c\/strong\u003e and \u003cstrong data-is-only-node=\"\" data-end=\"144\" data-start=\"124\"\u003e3-axis gyroscope\u003c\/strong\u003e to track motion, tilt, and rotation in real time for Arduino and other microcontroller projects. It communicates over \u003cstrong data-end=\"270\" data-start=\"263\"\u003eI2C\u003c\/strong\u003e, making it simple to wire and widely supported with libraries for reading raw data and calculating stable angles. Use it for robotics balancing, orientation tracking, gesture-based controls, step and movement detection, and any build where you want reliable motion sensing without bulky hardware.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":47072111984927,"sku":"TE-8P8A-SJB0","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_43a28903-db53-48b0-a89f-f26a2b17dc82.png?v=1770789218"},{"product_id":"bme280-pre-soldered-atmospheric-temperature-pressure-and-humidity-sensor","title":"BME280 Pre-Soldered Temperature, Pressure \u0026 Humidity Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003eThe \u003cstrong\u003eBME280 sensor\u003c\/strong\u003e module measures temperature, barometric pressure and humidity with solid accuracy in a compact, low‑power, tiny-footprint package ideal for Arduino and Raspberry Pi projects that run at 3.3V; it delivers reliable real-world environment data without a complicated setup. It integrates cleanly over \u003cstrong\u003eI2C or SPI\u003c\/strong\u003e with widespread library support for rapid prototyping and deployed IoT dashboards. Use it for weather stations, indoor air monitoring and altitude estimation from pressure trends; its \u003cstrong\u003e3.3V compatibility\u003c\/strong\u003e and simple wiring make dependable sensing quick to install.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":47072161005855,"sku":"XD-CNO5-PS0X","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/3_c8d4b8d9-3108-42b1-956c-a2379b99d511.jpg?v=1768630583"},{"product_id":"shillehtek-dht11-with-cables","title":"DHT11 Temperature \u0026 Humidity Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"79\"\u003eShillehTek DHT11 Temperature and Humidity Sensor\u003c\/strong\u003e is a simple, budget-friendly module for reading \u003cstrong data-start=\"128\" data-end=\"151\"\u003eambient temperature\u003c\/strong\u003e and \u003cstrong data-start=\"156\" data-end=\"177\" data-is-only-node=\"\"\u003erelative humidity\u003c\/strong\u003e in Arduino and Raspberry Pi projects. It uses a straightforward \u003cstrong data-start=\"242\" data-end=\"260\"\u003edigital signal\u003c\/strong\u003e and is one of the most common starter sensors for learning basic wiring, reading sensor data, and building quick environment monitors. Use it for beginner weather demos, room dashboards, basic home automation triggers, and classroom STEM projects where ease and cost matter most.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409082921247,"sku":"1B-BASA-FGCU","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_a4b6495a-07ba-44f0-b580-8c834b854558.jpg?v=1765786089"},{"product_id":"shillehtek-dht22-with-cables","title":"DHT22 Temperature \u0026 Humidity Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"79\"\u003eShillehTek DHT22 Temperature and Humidity Sensor\u003c\/strong\u003e is a popular, easy-to-use module for measuring \u003cstrong data-start=\"127\" data-end=\"150\"\u003eambient temperature\u003c\/strong\u003e and \u003cstrong data-start=\"155\" data-end=\"176\" data-is-only-node=\"\"\u003erelative humidity\u003c\/strong\u003e in Arduino and Raspberry Pi projects. It uses a simple \u003cstrong data-start=\"232\" data-end=\"262\"\u003esingle-wire digital signal\u003c\/strong\u003e, so it is beginner friendly and works great for quick prototypes like room monitors, greenhouse dashboards, home automation triggers, and basic weather station builds. If you want a straightforward sensor for everyday environment readings with tons of example code available, the DHT22 is a solid choice.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409109168415,"sku":"F4-3MQC-IF5F","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_dea55a2b-45d1-4339-9d7f-c2234a56ff42.jpg?v=1765777631"},{"product_id":"shillehtek-adxl345-pre-soldered","title":"ADXL345 Pre-Soldered Accelerometer Sensor for Arduino, Raspberry Pi \u0026 Klipper","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"70\"\u003eShillehTek ADXL345 Accelerometer Sensor\u003c\/strong\u003e is a compact \u003cstrong data-start=\"84\" data-end=\"108\"\u003e3-axis accelerometer\u003c\/strong\u003e that measures motion, tilt, and vibration for Arduino and Raspberry Pi projects, and it is especially popular with \u003cstrong data-start=\"224\" data-end=\"253\" data-is-only-node=\"\"\u003eKlipper 3D printer setups\u003c\/strong\u003e for resonance testing and input shaping. It supports \u003cstrong data-start=\"307\" data-end=\"322\"\u003eI2C and SPI\u003c\/strong\u003e, making it easy to integrate with a wide range of boards. Use it for 3D printer tuning, vibration analysis, motion detection, orientation sensing, and robotics projects where you need reliable acceleration data.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409150619935,"sku":"6E-3GB3-A152","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_02816adf-a66b-4a2f-9092-7a59f4239d3c.jpg?v=1765772265"},{"product_id":"shillehtek-ads-1115-pre-soldered","title":"ADS1115 Pre-Soldered ADC Analog to Digital Converter Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"60\"\u003eShillehTek ADS1115 ADC Module\u003c\/strong\u003e adds high-quality analog input capability to Arduino, Raspberry Pi, and other microcontroller projects by converting analog voltages into precise digital readings. It is a \u003cstrong data-start=\"233\" data-end=\"271\" data-is-only-node=\"\"\u003e16-bit analog-to-digital converter\u003c\/strong\u003e that communicates over \u003cstrong data-start=\"295\" data-end=\"302\"\u003eI2C\u003c\/strong\u003e, making it easy to wire and great for reading sensors that output analog signals like potentiometers, light sensors, force sensors, gas sensors, and battery or solar voltage monitors. Use it when your board does not have enough analog pins, when you want higher resolution than a typical built-in ADC, or when you need stable measurements for data logging and IoT dashboards.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409179619615,"sku":"KR-EZ4W-0150","price":9.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_625e9b77-37db-4d9d-9824-2199e2793ceb.jpg?v=1765778692"},{"product_id":"shillehtek-bmp180-pre-soldered","title":"BMP180 Pre-Soldered Pressure \u0026 Temperature Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek BMP180 Pressure and Temperature Sensor\u003c\/strong\u003e is a classic, beginner-friendly module for measuring \u003cstrong data-start=\"134\" data-end=\"157\"\u003ebarometric pressure\u003c\/strong\u003e and \u003cstrong data-start=\"162\" data-end=\"177\" data-is-only-node=\"\"\u003etemperature\u003c\/strong\u003e in Arduino and Raspberry Pi projects. It is widely used for \u003cstrong data-start=\"238\" data-end=\"261\"\u003ealtitude estimation\u003c\/strong\u003e by tracking pressure changes, which makes it great for simple weather stations, elevation tracking, drones, and robotics builds. The BMP180 communicates over \u003cstrong data-start=\"420\" data-end=\"427\"\u003eI2C\u003c\/strong\u003e, has tons of example code available, and is a solid choice when you want a proven sensor that is easy to wire and quick to get running.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409217401119,"sku":"XX-18H8-5HO6","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/2-zoomed-rotated.png?v=1714017747"},{"product_id":"shillehtek-bmp280-pre-soldered","title":"BMP280 Pre-Soldered Pressure \u0026 Temperature Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek BMP280 Pressure and Temperature Sensor\u003c\/strong\u003e is a compact, reliable module for measuring \u003cstrong data-start=\"125\" data-end=\"148\"\u003ebarometric pressure\u003c\/strong\u003e and \u003cstrong data-start=\"153\" data-end=\"168\" data-is-only-node=\"\"\u003etemperature\u003c\/strong\u003e in Arduino and Raspberry Pi projects. It is commonly used to estimate \u003cstrong data-start=\"239\" data-end=\"259\"\u003ealtitude changes\u003c\/strong\u003e from pressure readings, making it great for weather builds, indoor environment monitoring, drones, and robotics projects that benefit from elevation or pressure data. With \u003cstrong data-start=\"432\" data-end=\"489\"\u003eI2C (and often SPI support depending on the breakout)\u003c\/strong\u003e plus wide library support, it is an easy drop-in sensor for clean wiring and fast prototyping.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409233719583,"sku":"C8-HPX6-BL71","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1..jpg?v=1766204941"},{"product_id":"shillehtek-universal-power-supply-module","title":"MB102 Breadboard Power Supply Module 3.3V\/5V for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"78\"\u003eShillehTek MB102 Breadboard Power Supply Module\u003c\/strong\u003e makes it easy to power a standard MB102-style breadboard with stable \u003cstrong data-start=\"148\" data-end=\"163\"\u003e3.3V and 5V\u003c\/strong\u003e rails for Arduino-compatible projects, sensors, and quick prototypes. Instead of juggling loose jumper wires from a USB cable or a bench supply, you plug this module into the breadboard power header and select \u003cstrong data-start=\"374\" data-end=\"388\" data-is-only-node=\"\"\u003e3.3V or 5V\u003c\/strong\u003e per rail with simple jumpers or switches (depending on the version). It is perfect for powering sensors, small microcontrollers, and test circuits cleanly while you develop and debug.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49834275537183,"sku":"LC-ICRP-81MP","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_577b293e-b1fe-4bab-bb01-f16b2a70f125.png?v=1771744209"},{"product_id":"shillehtek-120pcs-multicolored-dupont-wire","title":"120pcs 20cm Dupont Jumper Wires for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"73\"\u003eShillehTek 120pcs 20cm Dupont Jumper Wires\u003c\/strong\u003e set is a go-to kit for clean, fast prototyping with Arduino, Raspberry Pi, breadboards, sensors, and development boards. With a mix of connector types, you can quickly link GPIO pins to modules, build test circuits without soldering, and keep wiring organized at a practical 20cm length. It is an essential accessory for any electronics bench, perfect for robotics, IoT builds, classroom projects, and rapid hardware debugging.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49834428236063,"sku":"CM-1XSW-YGPP","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_918e53b6-7e00-4fe1-a603-f055c70cd87e.jpg?v=1765784345"},{"product_id":"shillehtek-l298n-motor-driver-controller-board","title":"L298N Motor Driver Board for Arduino \u0026 Raspberry Pi DC and Stepper Motors","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"55\"\u003eL298N Motor Driver Board\u003c\/strong\u003e lets an Arduino or Raspberry Pi control \u003cstrong data-start=\"96\" data-end=\"128\"\u003eDC motors and stepper motors\u003c\/strong\u003e with direction and speed control from simple GPIO signals. It is a dual H-bridge driver, so you can run \u003cstrong data-start=\"233\" data-end=\"264\" data-is-only-node=\"\"\u003etwo DC motors independently\u003c\/strong\u003e (forward and reverse) or drive \u003cstrong data-start=\"296\" data-end=\"317\"\u003eone stepper motor\u003c\/strong\u003e. It is commonly used in robotics for small cars, tank tracks, conveyor prototypes, and any project where you need to control motors from a microcontroller without wiring a full motor control circuit from scratch.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49844339704095,"sku":"9F-RLTT-KUYL","price":6.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_1fc848f8-b943-4a96-bfea-2e4af237e2cb.png?v=1771743779"},{"product_id":"shillehtek-400-point-breadboard","title":"400-Point Small Solderless Breadboard for Arduino, Raspberry Pi \u0026 ESP32","description":"\u003cp\u003eThe \u003cstrong\u003eSHILLEHTEK 400-Point Small Solderless Breadboard\u003c\/strong\u003e is a compact, durable prototyping platform designed for hobbyists and makers who use Arduino, Raspberry Pi and ESP32, offering straightforward insertion of jumper wires for quick circuit assembly without soldering; its 400 connection points provide ample space for testing and iterating circuit designs while remaining portable for bench or field use, and the intuitive layout and reliable construction make it ideal for beginners and experienced developers who need a flexible, reusable board for rapid experimentation.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49854815174943,"sku":"ZB-M6VG-ONAU","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/988d9cabdf94a1bab30d4796ae44475f.jpg?v=1731905573"},{"product_id":"shillehtek-hc-sr04-with-rgb-light-distance","title":"HC-SR04 Ultrasonic Distance Sensor with RGB Light for Arduino, Raspberry Pi \u0026 Pico","description":"\u003cp\u003eThe SHILLEHTEK HC-SR04 Ultrasonic Distance Sensor with RGB Light combines a reliable \u003cstrong\u003eHC-SR04 ultrasonic module\u003c\/strong\u003e for straightforward distance measurement with an integrated \u003cstrong\u003eRGB module of six LEDs\u003c\/strong\u003e that can be driven by common libraries to provide color-coded proximity feedback. It runs from a 5V DC supply and operates across a broad range of approximately 2 cm to 400 cm (1\"–13 ft), suitable for robotics, obstacle detection, and DIY sensing projects. The unit is broadly compatible with popular microcontrollers and single-board computers, including Arduino and Raspberry Pi (Pico and Pico W), and can serve as a visual distance or status indicator. Practical, maker-focused, and easy to integrate into existing systems.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49862117982495,"sku":"06-EZZB-HL9Q","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_838a6140-3ba3-45a9-82fc-375414ee9714.jpg?v=1765785604"},{"product_id":"shillehtek-gy-302-bh1750-pre-soldered-light-intensity-module","title":"BH1750 Pre-Soldered Digital Light Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"69\"\u003eShillehTek BH1750 Digital Light Sensor\u003c\/strong\u003e measures ambient light intensity as a digital \u003cstrong data-start=\"116\" data-end=\"123\"\u003elux\u003c\/strong\u003e reading, making it perfect for Arduino and Raspberry Pi projects that need accurate light data without messy analog calibration. It communicates over \u003cstrong data-start=\"274\" data-end=\"281\" data-is-only-node=\"\"\u003eI2C\u003c\/strong\u003e, so wiring is simple and libraries are widely available. Use it for smart lighting, automatic dimming, plant grow monitoring, daylight detection, security lighting triggers, and any build where you want consistent, real-world light measurements.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49942034612511,"sku":"3O-WETZ-7FUE","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_631c26f3-3e2d-48b5-a28b-8ebdedd3d390.jpg?v=1765774410"},{"product_id":"shillehtek-mpu9250-authentic-gy-9250-pre-soldered","title":"MPU9250 GY-9250 Pre-Soldered 9-DOF IMU Sensor for Arduino, Raspberry Pi \u0026 ESP32","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek Pre-Soldered MPU9250 GY-9250 9-DOF IMU\u003c\/strong\u003e is a full motion sensing module that combines a \u003cstrong data-start=\"129\" data-end=\"196\" data-is-only-node=\"\"\u003e3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer\u003c\/strong\u003e to track orientation, rotation, movement, and heading in real time. It is a strong choice when you want more than basic tilt and acceleration, since the magnetometer adds compass style heading for more stable orientation tracking. With header pins pre-soldered, it is ready for quick wiring to Arduino, ESP32, Raspberry Pi, and other microcontroller projects for robotics, drones, navigation demos, and sensor fusion learning.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49949035036959,"sku":"BV-4QG9-CQJ8","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_8f9aac9e-6a98-41f3-8d79-c20b51b3e97d.jpg?v=1765782654"},{"product_id":"pre-soldered-gy-906-mlx90614-baa-infrared-temperature-sensor","title":"MLX90614 Pre-Soldered IR Temperature Sensor Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"72\"\u003eShillehTek MLX90614 IR Temperature Sensor\u003c\/strong\u003e measures temperature without contact by reading infrared energy, making it perfect for Arduino and Raspberry Pi projects where you cannot or do not want to touch the object. It communicates over \u003cstrong data-start=\"268\" data-end=\"275\" data-is-only-node=\"\"\u003eI2C\u003c\/strong\u003e, so it is easy to wire and widely supported with libraries. Use it for contactless surface temperature checks, human presence and skin-temperature style demos, electronics temperature monitoring, moving object measurements, and automation projects where you want fast temperature readings without a probe.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49952161628447,"sku":"VB-0T9M-PDE0","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_2d2956ca-023e-4c68-9bec-ffc366212e72.jpg?v=1732302100"},{"product_id":"shillehtek-hc-sr501-pir-motion-sensor-module","title":"HC-SR501 PIR Motion Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"68\"\u003eShillehTek HC-SR501 PIR Motion Sensor\u003c\/strong\u003e detects human movement by sensing changes in infrared heat, making it a simple and reliable way to add motion detection to Arduino and Raspberry Pi projects. It outputs a digital signal when motion is detected, so you can trigger lights, alarms, camera events, timers, or automation routines without complex processing. With onboard adjustments for sensitivity and delay time, it is easy to tune for hallways, rooms, entryways, and DIY security builds.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49955430531359,"sku":"XB-BYD0-4PBE","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/3_57548253-cce3-4624-9bad-df4f071b41e3.png?v=1771011191"},{"product_id":"shillehtek-6mm-650nm-5mw-red-laser-diode-module","title":"6mm 650nm 5mW Red Laser Diode Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"78\"\u003eShillehTek 6mm 650nm 5mW Red Laser Diode Module\u003c\/strong\u003e is a compact red laser emitter for Arduino and Raspberry Pi projects that need a visible, focused beam for alignment, tripwire style detection, pointing, and optics demos. It is commonly used with photodiodes or LDR sensors to build simple beam-break alarms, positioning guides, and basic robotics alignment tools. With a standard module form factor, it is easy to mount in enclosures or brackets and control from a microcontroller using a GPIO pin and proper current limiting.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49990379995423,"sku":"JF-LKPK-YAF4","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_75ba9160-444d-49e5-b78b-ef1843dc517b.png?v=1773473786"},{"product_id":"shillehtek-iic-i2c-logic-level-converter-pre-soldered","title":"Pre-Soldered I2C Logic Level Converter 3.3V-5V Bi-Directional for Arduino, Raspberry Pi, ESP32 \u0026 Pico","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"96\"\u003eShillehTek I2C Logic Level Converter (3.3V to 5V, bi-directional)\u003c\/strong\u003e lets 3.3V boards safely communicate with 5V devices on \u003cstrong data-start=\"152\" data-end=\"187\"\u003eIIC\/I2C and other digital lines\u003c\/strong\u003e without flaky signals or risking damage. It is perfect when you are mixing systems like \u003cstrong data-start=\"276\" data-end=\"314\" data-is-only-node=\"\"\u003eRaspberry Pi, ESP32, Pico W (3.3V)\u003c\/strong\u003e with \u003cstrong data-start=\"320\" data-end=\"362\"\u003eArduino UNO, 5V sensors, or 5V modules\u003c\/strong\u003e. This bi-directional converter is commonly used on I2C buses (SDA\/SCL) and can also be used for other digital signals where clean level shifting matters.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"1","offer_id":51517761388831,"sku":"DG-PPV2-DB31","price":6.25,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":50575497363743,"sku":"2H-1IDF-42YG","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_21c04d29-f871-48e9-8029-22977ac5ce46.jpg?v=1765781320"},{"product_id":"shillehtek-120pcs-10cm-multicolored-jumper-wire","title":"120pcs 10cm Jumper Wire Set M-F, M-M, F-F for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"69\"\u003eShillehTek 120pcs 10cm Jumper Wire Set\u003c\/strong\u003e is a compact Dupont wire kit for fast, solder-free prototyping with \u003cstrong data-start=\"138\" data-end=\"205\"\u003eArduino, Raspberry Pi, breadboards, sensors, and 2.54mm headers\u003c\/strong\u003e. It includes \u003cstrong data-start=\"219\" data-end=\"273\" data-is-only-node=\"\"\u003eMale to Female, Male to Male, and Female to Female\u003c\/strong\u003e jumpers so you can connect GPIO pins to modules, bridge breadboard rows, and wire up multi-sensor builds cleanly. The \u003cstrong data-start=\"392\" data-end=\"407\"\u003e10cm length\u003c\/strong\u003e keeps wiring tidy for small projects and makes troubleshooting way easier.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49993437282591,"sku":"SZ-M6BZ-GJ2G","price":5.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_748a1ae9-3878-47c4-8fad-0ba03cdc4b5e.jpg?v=1765782307"},{"product_id":"shillehtek-mpu-6050-module-gy-521-module-unsoldered-version","title":"MPU6050 GY-521 V2 Unsoldered IMU Accelerometer \u0026 Gyroscope Sensor for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"86\"\u003eShillehTek MPU6050 GY-521 V2 (unsoldered, single piece)\u003c\/strong\u003e is a compact \u003cstrong data-start=\"100\" data-end=\"114\"\u003e6-axis IMU\u003c\/strong\u003e that combines a \u003cstrong data-start=\"131\" data-end=\"155\" data-is-only-node=\"\"\u003e3-axis accelerometer\u003c\/strong\u003e and \u003cstrong data-start=\"160\" data-end=\"180\"\u003e3-axis gyroscope\u003c\/strong\u003e to measure motion, tilt, and rotation in real time for Arduino and other microcontroller projects. It uses \u003cstrong data-start=\"288\" data-end=\"295\"\u003eI2C\u003c\/strong\u003e, so it is easy to wire and supported by tons of example code and libraries. Since this version is \u003cstrong data-start=\"394\" data-end=\"408\"\u003eunsoldered\u003c\/strong\u003e, it is perfect if you want a clean custom build, plan to solder your own header pins, or are integrating the module directly into a prototype or PCB.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49993462677791,"sku":"JT-PJUN-WMMQ","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_4212da26-c128-4276-abfa-969ddb13759c.jpg?v=1765779943"},{"product_id":"shillehtek-5v-4-phase-stepper-motor-with-uln2003-driver","title":"ULN2003 5V 4-Phase Stepper Motor with Driver Board for Arduino, Raspberry Pi \u0026 ESP32","description":"\u003cp\u003e\u003cstrong\u003eSHILLEHTEK ULN2003\u003c\/strong\u003e 5V 4-phase stepper motor with ULN2003 driver board delivers \u003cstrong\u003eprecise, reliable motion control\u003c\/strong\u003e for Arduino, Raspberry Pi, PIC and ESP32 projects, ideal for robotics, model actuation and interactive art installations; the included driver board simplifies wiring and speeds prototyping, while stable 5V operation provides consistent torque and repeatable positioning; durable construction supports long-term DIY and educational deployment, making this compact module a versatile choice for builders seeking \u003cstrong\u003eeasy integration\u003c\/strong\u003e and professional-grade stepper performance.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49993501147423,"sku":"7J-LEGI-VA05","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_bbc29948-3a46-420e-a849-8131d6a90cc6.png?v=1773473044"},{"product_id":"shillehtek-5pcs-2x20pin-dual-male-header-double-row-for-pcb-breadboards-raspberry-pi-ardiuno-esp32-compatible-with-raspberry-pi-zero-gpio","title":"2x20 Pin Dual Male Header Pins 5-Pack for Raspberry Pi GPIO, Arduino \u0026 ESP32","description":"\u003cp\u003eShillehTek 5pcs Dual Male Header Pins for Raspberry Pi GPIO provide a reliable, space-saving solution optimized for Raspberry Pi Zero projects and compatible single-board computers, delivering consistent, seamless GPIO connections every time; these straight, double-row connectors use a 2x20pin layout with a standard 2.54mm pitch for broad PCB, breadboard, Arduino and ESP32 compatibility, are built from durable materials for stable, long-term contacts, and the pack of five offers great value for prototyping, iteration and final designs with easy integration into your electronics workflow.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49994057711903,"sku":"HF-WSM3-EB2L","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_7fc5a5be-fb3f-4354-b230-23a47958ebeb.jpg?v=1765780765"},{"product_id":"shillehtek-ft232rl-mini-usb-to-ttl-serial-converter-adapter-module-2pcs","title":"FT232RL Mini USB to TTL Serial Converter 2-Pack 3.3V\/5V for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003eThe FT232RL Mini USB to TTL Serial Converter is a compact, maker-focused adapter that links microcontrollers to a PC for straightforward serial communication. Powered by the \u003cstrong\u003eFT232RL\u003c\/strong\u003e chip, this module provides reliable data transfer for programming, firmware updates, and serial debugging. It supports \u003cstrong\u003e3.3V and 5V\u003c\/strong\u003e operation, making it compatible with a wide range of development boards including Arduino and Raspberry Pi, and it uses a mini USB connector for plug-and-play setup without complicated wiring. Supplied as a convenient 2-pack, these converters give you a spare for parallel projects or quick swaps during prototyping, keeping benches tidy and workflows efficient for hobbyists and professionals alike.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49994062102815,"sku":"HO-A533-21V8","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/Untitleddesign_6818b2bf-9451-47db-a34a-6a57ad094a51.png?v=1732856910"},{"product_id":"shillehtek-adxl345-pre-soldered-3-axis-digital-angle-acceleration-sensor-module","title":"ADXL345 Pre-Soldered 3-Axis Accelerometer Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003eCompact ADXL345 3-Axis Accelerometer for Arduino and Raspberry Pi projects, delivered pre-soldered to speed prototyping and avoid soldering equipment; ideal for makers and developers seeking plug-in motion sensing. The module supports both \u003cstrong\u003eI2C\u003c\/strong\u003e and \u003cstrong\u003eSPI\u003c\/strong\u003e communications for flexible connection to microcontrollers and SBCs, and its integrated low-pass filter reduces measurement noise while a wake-up function helps minimize power draw when idle. Important: this ADXL345 variant is not Klipper Input Shaper compatible out of the box — the R4 pull-down resistor must be removed to enable that capability.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49994067247391,"sku":"89-213Z-D4LP","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_01a26a79-4acd-4142-ab23-e37ada68a12b.jpg?v=1765794719"},{"product_id":"shillehtek-830-point-breadboard-for-arduino-raspberry-pi-esp32-and-other-microcontrollers","title":"830 Point Solderless Breadboard for Arduino, Raspberry Pi \u0026 ESP32","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"62\"\u003eShillehTek 830 Point Breadboard\u003c\/strong\u003e is a classic solder-free prototyping board that makes it easy to build and test circuits quickly with Arduino, Raspberry Pi, ESP32, sensors, and modules. With plenty of tie points, you can prototype everything from simple LED circuits to multi-sensor IoT builds without committing to solder. It is ideal for learning electronics, rapid debugging, and building clean test setups before moving to a permanent board.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49994081665311,"sku":"IN-CBXZ-DAS4","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_14ef0d44-9bfa-40db-b5a4-99f0c935b982.png?v=1773475862"},{"product_id":"shillehtek-pre-soldered-txs0108e-high-speed-full-duplex-8-channel-logic-level-bi-directional-converter","title":"TXS0108E Pre-Soldered 8-Channel Logic Level Converter for Arduino, Raspberry Pi, ESP32 \u0026 Pico","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"95\"\u003eShillehTek Pre-Soldered TXS0108E 8-Channel Logic Level Converter\u003c\/strong\u003e is a fast, multi-channel voltage translator that lets \u003cstrong data-start=\"150\" data-end=\"192\"\u003e3.3V and 5V devices communicate safely\u003c\/strong\u003e in the same project. It is perfect when you are mixing boards like \u003cstrong data-start=\"260\" data-end=\"296\" data-is-only-node=\"\"\u003eRaspberry Pi, ESP32, Pico (3.3V)\u003c\/strong\u003e with \u003cstrong data-start=\"302\" data-end=\"328\"\u003eArduino and 5V modules\u003c\/strong\u003e, especially when you need more than just SDA\/SCL. With \u003cstrong data-start=\"384\" data-end=\"398\"\u003e8 channels\u003c\/strong\u003e and \u003cstrong data-start=\"403\" data-end=\"427\"\u003epre-soldered headers\u003c\/strong\u003e, it is ready for clean, quick wiring in breadboard builds and projects with lots of digital signals.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"1","offer_id":51517757423903,"sku":"UR-OLYQ-ZZ3B","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":50575495004447,"sku":"AD-8BVC-BW8P","price":7.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_9d57f4b2-cc50-4540-828d-24f71e8ab894.jpg?v=1765779535"},{"product_id":"shillehtek-lcd1602-16x2-keypad-shield","title":"LCD1602 16x2 Keypad Shield for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003eThe ShillehTek LCD1602 16x2 Keypad Shield brings a compact 16x2 character display and onboard controls to Arduino and Raspberry Pi projects. With \u003cstrong\u003ewide compatibility\u003c\/strong\u003e for Arduino UNO, Mega, and Raspberry Pi, it installs as a plug-and-play shield and includes pre-soldered headers for quick, reliable connections. The LCD uses a \u003cstrong\u003ebright blue backlight\u003c\/strong\u003e for easy readability in low-light environments, and the integrated five-button keypad provides straightforward user input for menus, navigation, and interactive sketches. Designed for makers, students, and hobbyists, this shield is well suited to robotics, IoT, STEM, and general electronics prototyping, helping you move from idea to working demo without complex wiring or extra modules.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50795670536479,"sku":"72-CXUX-RDLJ","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_7ad7c616-a75d-4d0d-b119-b8282d55c3fa.png?v=1773475316"},{"product_id":"shillehtek-lcd1602-16x2-character-display-module","title":"LCD1602 16x2 LCD Display Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"69\"\u003eShillehTek LCD1602 16x2 Display Module\u003c\/strong\u003e is a classic character LCD that shows \u003cstrong data-start=\"108\" data-end=\"149\"\u003e16 characters per line across 2 lines\u003c\/strong\u003e, making it perfect for simple project UIs like sensor readouts, menus, counters, and status messages. It is widely supported with Arduino and Raspberry Pi libraries and is a go-to display for beginners because it is reliable, readable, and easy to integrate into almost any DIY build. Use it for temperature and humidity dashboards, timers, voltage monitors, robot status screens, and quick debugging output without needing a full graphics display.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50795677942047,"sku":"72-CXUX-RDLJ","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_2929f113-3392-4d0f-ba5d-057cddf009a6.png?v=1770600459"},{"product_id":"shillehtek-lm2596-dc-dc-adjustable-step-down-power-supply-module","title":"LM2596 Step-Down Buck Converter Module with Digital Voltmeter","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"92\"\u003eLM2596 Step-Down Buck Converter Module with Digital Voltmeter\u003c\/strong\u003e lets you efficiently convert a higher DC voltage down to a stable lower voltage for powering Arduino, Raspberry Pi, sensors, LED strips, motors, and other electronics. Unlike a basic linear regulator, a buck converter wastes far less power as heat, making it a solid choice for battery and robotics builds. The onboard \u003cstrong data-start=\"412\" data-end=\"433\"\u003edigital voltmeter\u003c\/strong\u003e makes setup easy, so you can dial in the output voltage and verify it at a glance before connecting your project.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50795687379231,"sku":"U8-L7PF-4VP6","price":6.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/937d236f923389005a399875cb18f85d.jpg?v=1743775363"},{"product_id":"1-channel-5v-relay-module","title":"1-Channel 5V Relay Board for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"55\"\u003e1-Channel 5V Relay Board\u003c\/strong\u003e lets an Arduino or Raspberry Pi control higher-voltage devices using a simple GPIO signal, acting like a safe electronic on\/off switch for lights, fans, pumps, solenoids, and other loads. It takes a low-voltage control input from your microcontroller and toggles a mechanical relay, so you can isolate the control side from the load side while building automation projects. This module is ideal for smart home prototypes, timed switches, sensor-triggered power control, and DIY control panels where you need reliable switching from a 5V logic system.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798322942239,"sku":"80-6B4O-YPJH","price":5.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/6896_60.jpg?v=1743912671"},{"product_id":"1-channel-12v-relay-module","title":"1-Channel 12V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"68\"\u003eShillehTek 1-Channel 12V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control a single device like an electronically controlled on\/off switch, while the relay itself is powered from a \u003cstrong data-start=\"215\" data-end=\"229\"\u003e12V supply\u003c\/strong\u003e. It is perfect for simple automation builds where you need one controllable output for a light, fan, pump, solenoid, or other load, using a basic GPIO trigger signal. This is a clean, beginner-friendly way to switch higher-power devices without building a relay driver circuit from scratch.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798322975007,"sku":"7Q-OTZQ-YHAI","price":5.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/6896_60.jpg?v=1743912671"},{"product_id":"1-channel-24v-relay-module","title":"1-Channel 24V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"68\"\u003eShillehTek 1-Channel 24V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control a single device like an electronically controlled on\/off switch, while the relay side is powered from a \u003cstrong data-start=\"213\" data-end=\"227\"\u003e24V supply\u003c\/strong\u003e. It is ideal for industrial-style automation builds and control boxes where 24V is already standard and you need one switched output for a light, fan, pump, valve, or solenoid. This module gives you a clean, reliable way to switch loads from a simple GPIO trigger signal without building the driver circuit yourself.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798323237151,"sku":"I9-8F26-F6LZ","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/6896_60.jpg?v=1743912671"},{"product_id":"2-channel-5v-relay-module","title":"2-Channel 5V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"67\"\u003eShillehTek 2-Channel 5V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control \u003cstrong data-start=\"108\" data-end=\"137\"\u003etwo devices independently\u003c\/strong\u003e using simple GPIO signals, acting like two electronic on\/off switches on a single board. It is ideal for small automation projects where you want separate control of two loads, like a light and a fan, two pumps, or two zones in a prototype control panel. This module is a clean step up from a single relay when you need more control without extra wiring complexity.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798327595295,"sku":"5P-0G1K-S8VR","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4308_40.jpg?v=1765942376"},{"product_id":"2-channel-12v-relay-module","title":"2-Channel 12V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"57\"\u003e2-Channel 12V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control \u003cstrong data-start=\"98\" data-end=\"127\"\u003etwo devices independently\u003c\/strong\u003e while powering the relays from a \u003cstrong data-start=\"161\" data-end=\"175\" data-is-only-node=\"\"\u003e12V supply\u003c\/strong\u003e. Each relay works like an electronically controlled on\/off switch, so your code can toggle two separate loads from simple GPIO trigger signals. It is ideal for small control panels and automation builds where you already have 12V power available and want clean, reliable switching for things like lights, pumps, fans, valves, or solenoids.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798329561375,"sku":"MO-2K7O-0RR0","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_44aab82c-0859-4a7d-9253-62cfc2d3b1a9.jpg?v=1765942376"},{"product_id":"2-channel-24v-relay-module","title":"2-Channel 24V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"57\"\u003e2-Channel 24V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control \u003cstrong data-start=\"98\" data-end=\"127\"\u003etwo devices independently\u003c\/strong\u003e while powering the relay side from a \u003cstrong data-start=\"165\" data-end=\"179\" data-is-only-node=\"\"\u003e24V supply\u003c\/strong\u003e. Each channel acts like an electronically controlled on\/off switch, so your code can toggle two separate loads for automation projects, control boxes, and test setups. This is ideal for industrial-style builds where \u003cstrong data-start=\"396\" data-end=\"423\"\u003e24V is already standard\u003c\/strong\u003e and you want clean, reliable switching without wiring two separate relay modules.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798329856287,"sku":"HY-V0JJ-EGIV","price":6.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_44aab82c-0859-4a7d-9253-62cfc2d3b1a9.jpg?v=1765942376"},{"product_id":"4-channel-5v-relay-module","title":"4-Channel 5V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"56\"\u003e4-Channel 5V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control up to \u003cstrong data-start=\"103\" data-end=\"133\"\u003efour devices independently\u003c\/strong\u003e, acting like four GPIO-controlled on\/off switches in one board. It is a great middle ground when you need more than a single relay but do not want a large multi-relay panel. Use it for multi-zone lighting, pumps, fans, solenoids, small automation panels, and test setups where you want simple, reliable switching from a 5V control system.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798332576031,"sku":"AQ-E1AN-UQUQ","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4323_40.jpg?v=1743914221"},{"product_id":"4-channel-12v-relay-module","title":"4-Channel 12V Relay Module Board for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"63\"\u003e4-Channel 12V Relay Module Board\u003c\/strong\u003e lets an Arduino or Raspberry Pi control up to \u003cstrong data-start=\"110\" data-end=\"140\"\u003efour devices independently\u003c\/strong\u003e while powering the relay side from a \u003cstrong data-start=\"178\" data-end=\"192\" data-is-only-node=\"\"\u003e12V supply\u003c\/strong\u003e. Each channel acts like an electrically controlled on\/off switch, so your code can toggle lights, fans, pumps, valves, and other loads from simple GPIO trigger signals. This is a great option for control boxes and automation builds that already run on 12V power and need multiple switched outputs without wiring four separate relay boards.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798334017823,"sku":"ON-NHVM-9R0Q","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4_7c1ff40a-1743-474c-865f-72d89486d67e.png?v=1770600012"},{"product_id":"4-channel-24v-relay-module","title":"4-Channel 24V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"68\"\u003eShillehTek 4-Channel 24V Relay Module\u003c\/strong\u003e lets an Arduino or Raspberry Pi control up to \u003cstrong data-start=\"115\" data-end=\"145\"\u003efour devices independently\u003c\/strong\u003e, while the relay side is powered from a \u003cstrong data-start=\"186\" data-end=\"200\" data-is-only-node=\"\"\u003e24V supply\u003c\/strong\u003e. Each relay acts like an electronically controlled on\/off switch, so your code can toggle multiple loads for automation panels, control boxes, and test setups. This is a great fit for industrial-style projects where \u003cstrong data-start=\"417\" data-end=\"444\"\u003e24V is already standard\u003c\/strong\u003e, and you want clean multi-output switching without wiring four separate relay boards.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798334738719,"sku":"H4-FSMI-M9W2","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4323_40.jpg?v=1743914221"},{"product_id":"8-channel-5v-relay-module","title":"8-Channel 5V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"67\"\u003eShillehTek 8-Channel 5V Relay Module\u003c\/strong\u003e lets your Arduino or Raspberry Pi control up to \u003cstrong data-start=\"116\" data-end=\"147\" data-is-only-node=\"\"\u003eeight devices independently\u003c\/strong\u003e, acting like eight electronically controlled on\/off switches in one board. It is perfect for home automation panels, multi-zone lighting, pumps\/solenoids, irrigation prototypes, test rigs, and any project where you need to switch multiple loads from GPIO signals. Each channel can be triggered from a control pin, so you can build clean, scalable automation without wiring eight separate relay boards.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798335820063,"sku":"BV-5WP3-L93C","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4291_32.jpg?v=1743914558"},{"product_id":"8-channel-12v-relay-module","title":"8-Channel 12V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"68\"\u003eShillehTek 8-Channel 12V Relay Module\u003c\/strong\u003e lets your Arduino or Raspberry Pi control up to \u003cstrong data-start=\"117\" data-end=\"148\" data-is-only-node=\"\"\u003eeight devices independently\u003c\/strong\u003e, giving you a clean way to build multi-output automation panels and test rigs. Each relay acts like an electrically controlled switch, so your code can turn loads on and off on command. This 12V version is useful when your control setup already has a 12V rail for relay power (while your GPIO still provides the trigger signals), making it a solid fit for robotics cabinets, DIY control boxes, lighting zones, pumps, valves, and other multi-channel switching projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798335852831,"sku":"CR-3SU1-CJ2E","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4291_32.jpg?v=1743914558"},{"product_id":"8-channel-12v-relay-module-copy","title":"8-Channel 24V Relay Module for Arduino \u0026 Raspberry Pi","description":"\u003cp data-start=\"0\" data-end=\"530\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"68\"\u003eShillehTek 8-Channel 24V Relay Module\u003c\/strong\u003e lets your Arduino or Raspberry Pi control up to \u003cstrong data-start=\"117\" data-end=\"148\"\u003eeight devices independently\u003c\/strong\u003e, while powering the relay side from a \u003cstrong data-start=\"187\" data-end=\"201\" data-is-only-node=\"\"\u003e24V supply\u003c\/strong\u003e. Each relay acts like an electrically controlled on\/off switch, so your code can toggle multiple loads for automation panels, test rigs, and control boxes. This is a strong fit for industrial-style projects where \u003cstrong data-start=\"415\" data-end=\"448\"\u003e24V power is already standard\u003c\/strong\u003e, and you want a clean way to switch multiple outputs from simple trigger signals.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50798336344351,"sku":"CZ-2UGJ-ZWHC","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4291_32.jpg?v=1743914558"},{"product_id":"shillehtek-pre-soldered-3-5mm-stereo-audio-jack-breakout-board","title":"Pre-Soldered 3.5mm Stereo Audio Jack Breakout Board for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek 3.5mm Stereo Audio Jack Breakout Board\u003c\/strong\u003e makes it easy to connect a standard \u003cstrong data-start=\"117\" data-end=\"140\" data-is-only-node=\"\"\u003eAUX\/TRS 3.5mm cable\u003c\/strong\u003e to your Arduino, Raspberry Pi, or audio projects without messy soldering directly to a tiny jack. It breaks out the \u003cstrong data-start=\"257\" data-end=\"284\"\u003eLeft, Right, and Ground\u003c\/strong\u003e connections (and in some versions extra pins for jack switching) so you can route audio into an amplifier, feed audio into an ADC, or build simple audio input\/output experiments. It is perfect for DIY audio builds, sound-reactive projects, line-in monitoring, and quick prototyping where you want a clean, reliable audio connector.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51470233534751,"sku":"9D-9SPF-ROD7","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/66eef81a896ee17ccd4c9d41f9bd2bad.jpg?v=1765664774"},{"product_id":"50cm-alligator-clips-test-leads-double-ended-electrical-jumper-wire","title":"50cm Double-Ended Alligator Clip Test Leads (10pcs) for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"74\"\u003e50cm Double-Ended Alligator Clip Test Leads\u003c\/strong\u003e are flexible jumper leads designed for quick, temporary electrical connections when prototyping, testing, and troubleshooting circuits. With alligator clips on both ends, you can easily clamp onto component legs, header pins, terminals, batteries, and breadboard jumpers without soldering. These are perfect for bench testing, quick power hookups, continuity checks, electronics labs, classroom demos, and rapid wiring for Arduino and Raspberry Pi projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51503126937887,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_7664fb28-4e48-40fe-a0fb-55caebb3841e.png?v=1771393006"},{"product_id":"hm-10-bluetooth-4-0-ble-cc2541-master-slave-module-for-arduino","title":"HM-10 Bluetooth 4.0 BLE CC2541 Master\/Slave Module for Arduino","description":"\u003cp\u003eThe HM-10 Bluetooth 4.0 BLE CC2541 Master Slave Module adds low-energy wireless connectivity to Arduino and IoT projects, providing a compact, power-efficient way to link microcontrollers with iOS and Android smartphones. Powered by the reliable CC2541 chip, the module uses \u003cstrong\u003eBluetooth Low Energy (BLE) 4.0\u003c\/strong\u003e and can be set to \u003cstrong\u003eMaster and Slave modes\u003c\/strong\u003e so your device can initiate connections or wait for peers, useful for remote robots, wireless sensor networks, and smart home devices. Setup and tuning are handled via a simple serial interface using AT commands to adjust baud rate, password, and role, making integration straightforward for makers who need practical, low-power BLE communication without extra complexity.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51503139488031,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_15cb26b3-bb20-42a0-bf10-37b811d95d1e.png?v=1771545501"},{"product_id":"cp2102-usb-to-ttl-uart-serial-converter-module-6pin-for-arduino","title":"CP2102 USB to TTL UART Serial Converter Module 6-Pin for Arduino, ESP32 \u0026 ESP8266","description":"\u003cp\u003eA compact, reliable USB 2.0 to TTL serial adapter designed for programming and debugging microcontrollers on the bench. Built around the \u003cstrong\u003eSilicon Labs CP2102 chipset\u003c\/strong\u003e, this module creates a virtual COM port for firmware uploads and serial monitoring with broad driver support across Windows, Mac OS, and Linux. The small black PCB includes a 6-pin interface with a DTR line to enable automatic reset when flashing boards like the Arduino Pro Mini, ESP8266, ESP32, and many STM32 or other embedded modules that lack onboard USB. It offers \u003cstrong\u003edual voltage support\u003c\/strong\u003e with dedicated 3.3V and 5V pins and includes an integrated self-recovery fuse to protect your computer’s USB port and target device during development.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51503140110623,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_b39bf264-6aec-446f-bd66-5c0549c618b4.png?v=1771545844"},{"product_id":"pcf8574-i2c-serial-interface-adapter-module-for-1602-2004-lcd","title":"PCF8574 I2C Serial Interface Adapter Module for 1602 \u0026 2004 LCD Displays","description":"\u003cp\u003eThe PCF8574 I2C Serial Interface Adapter converts the 16‑pin parallel connection of common character displays into a two‑wire I2C interface, letting you drive 1602 (16x2) and 2004 (20x4) modules with just SDA and SCL. Often called an “LCD backpack,” it solders to the display header and includes an onboard potentiometer for easy contrast tuning. Use the A0\/A1\/A2 solder pads to change the I2C address (default 0x27 or 0x3F) so multiple screens can share one bus, and remove the backlight jumper cap to disable the LED backlight for lower power when needed. Practical for Arduino and other microcontroller projects, this adapter preserves GPIO for sensors and actuators while simplifying wiring and setup; \u003cstrong\u003esaves I\/O pins\u003c\/strong\u003e and makes integration straightforward.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51503149416735,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AA134.jpg?v=1767596516"},{"product_id":"sg92r-micro-servo-motor-9g-carbon-fiber-gears-2-5kg-for-rc-plane","title":"SG92R 9g Micro Servo Motor with Carbon Fiber Gears 2.5kg for RC Plane \u0026 Arduino","description":"\u003cp\u003eThe SG92R micro servo brings durable, precise motion to lightweight builds without extra bulk. In the familiar 9g form factor it fits SG90 mounts and small RC models, offering a full 0–180° range and responsive digital control for snappier positioning and tighter deadband than older analog units. Reinforced with \u003cstrong\u003ecarbon fiber gears\u003c\/strong\u003e, the servo resists stripping and handles higher loads than standard nylon gear alternatives. It delivers a practical 2.5 kg·cm stall torque—\u003cstrong\u003e2.5kg\/cm\u003c\/strong\u003e—suitable for control surfaces on small airplanes, hobby robotics, and Arduino automation. If you need a compact, maker-friendly actuator that balances low weight, improved gear strength, and faster digital response, the SG92R is a straightforward upgrade over basic 9g servos.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51503160099103,"sku":null,"price":6.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AA171.jpg?v=1767596811"},{"product_id":"mt3608-dc-dc-step-up-boost-converter-2a-adjustable-power-module","title":"MT3608 DC-DC Step-Up Boost Converter 2A Adjustable Power Module for Arduino","description":"\u003cp\u003eConvert a single-cell battery into a flexible power source with the MT3608 DC-DC step-up module — it steps low-voltage inputs (for example a 3.7V Li‑ion) up to common voltages such as 5V, 9V, or 12V for Arduino boards, motors, and sensors. The board operates from low inputs (around 2V) and can be adjusted for higher outputs commonly used up to about 28V, delivering reliable performance in portable projects. The switch-mode regulator is designed for efficiency (up to 93%) to preserve battery life, and a precision multi-turn trimmer lets you fine-tune the output; note the potentiometer may require roughly 15–20 counter-clockwise turns before the voltage begins to change. Compact and maker-focused, it’s a practical choice for DIY power solutions with \u003cstrong\u003eup to 2A peak output\u003c\/strong\u003e and a \u003cstrong\u003ehigh-sensitivity trimpot\u003c\/strong\u003e for accurate tuning.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51503160525087,"sku":null,"price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_84982e91-cd70-46bb-821c-a38ee49aea94.png?v=1771435253"},{"product_id":"pca9685-16-channel-12-bit-pwm-servo-motor-driver-i2c-for-arduino","title":"PCA9685 Pre-Soldered 16-Channel 12-Bit PWM Servo Motor Driver I2C for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003eStop running out of PWM pins: this PCA9685 board gives you precise, practical control for multi-servo and LED projects, freeing your microcontroller to handle higher-level tasks. The board provides \u003cstrong\u003e16-channel, 12-bit\u003c\/strong\u003e PWM outputs (4096 steps per channel) and talks over the standard SDA\/SCL bus so you only use two data pins. It includes a screw terminal and protection capacitor to accept external motor power (up to 6V) separate from logic power, and can be daisy-chained—addressable up to 62 modules for a theoretical 992 PWM outputs—making it ideal for large robots, arms, or lighting arrays. Works with 3.3V and 5V logic, so it pairs cleanly with Arduino, Raspberry Pi, and other microcontrollers using the \u003cstrong\u003eI2C\u003c\/strong\u003e interface. The header pins ship pre-soldered, so it works out of the box with no soldering required.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51504758489375,"sku":null,"price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_6facb280-185c-4650-a483-99f74538b935.png?v=1771399969"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/collections\/Raspberry_Pi_Collection.png?v=1776182137","url":"https:\/\/shillehtek.com\/collections\/raspberry-pi-compatible.oembed?page=4","provider":"ShillehTek","version":"1.0","type":"link"}