{"title":"Pre-soldered Modules","description":"\u003cp\u003eSkip the soldering iron — our pre-soldered modules come with headers already attached so you can plug in and start prototyping immediately. Sensors, development boards, converters and more.\u003c\/p\u003e","products":[{"product_id":"mpu-6050-pre-soldered-6-dof-accelerometer","title":"MPU6050 Pre-Soldered IMU Accelerometer Sensor 2-Pack for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-end=\"83\" data-start=\"27\"\u003eShillehTek MPU6050 IMU Accelerometer Sensor (2-pack)\u003c\/strong\u003e combines a \u003cstrong data-end=\"119\" data-start=\"95\"\u003e3-axis accelerometer\u003c\/strong\u003e and \u003cstrong data-is-only-node=\"\" data-end=\"144\" data-start=\"124\"\u003e3-axis gyroscope\u003c\/strong\u003e to track motion, tilt, and rotation in real time for Arduino and other microcontroller projects. It communicates over \u003cstrong data-end=\"270\" data-start=\"263\"\u003eI2C\u003c\/strong\u003e, making it simple to wire and widely supported with libraries for reading raw data and calculating stable angles. Use it for robotics balancing, orientation tracking, gesture-based controls, step and movement detection, and any build where you want reliable motion sensing without bulky hardware.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":47072111984927,"sku":"TE-8P8A-SJB0","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_43a28903-db53-48b0-a89f-f26a2b17dc82.png?v=1770789218"},{"product_id":"bme280-pre-soldered-atmospheric-temperature-pressure-and-humidity-sensor","title":"BME280 Pre-Soldered Temperature, Pressure \u0026 Humidity Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003eThe \u003cstrong\u003eBME280 sensor\u003c\/strong\u003e module measures temperature, barometric pressure and humidity with solid accuracy in a compact, low‑power, tiny-footprint package ideal for Arduino and Raspberry Pi projects that run at 3.3V; it delivers reliable real-world environment data without a complicated setup. It integrates cleanly over \u003cstrong\u003eI2C or SPI\u003c\/strong\u003e with widespread library support for rapid prototyping and deployed IoT dashboards. Use it for weather stations, indoor air monitoring and altitude estimation from pressure trends; its \u003cstrong\u003e3.3V compatibility\u003c\/strong\u003e and simple wiring make dependable sensing quick to install.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":47072161005855,"sku":"XD-CNO5-PS0X","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/3_c8d4b8d9-3108-42b1-956c-a2379b99d511.jpg?v=1768630583"},{"product_id":"shillehtek-adxl345-pre-soldered","title":"ADXL345 Pre-Soldered Accelerometer Sensor for Arduino, Raspberry Pi \u0026 Klipper","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"70\"\u003eShillehTek ADXL345 Accelerometer Sensor\u003c\/strong\u003e is a compact \u003cstrong data-start=\"84\" data-end=\"108\"\u003e3-axis accelerometer\u003c\/strong\u003e that measures motion, tilt, and vibration for Arduino and Raspberry Pi projects, and it is especially popular with \u003cstrong data-start=\"224\" data-end=\"253\" data-is-only-node=\"\"\u003eKlipper 3D printer setups\u003c\/strong\u003e for resonance testing and input shaping. It supports \u003cstrong data-start=\"307\" data-end=\"322\"\u003eI2C and SPI\u003c\/strong\u003e, making it easy to integrate with a wide range of boards. Use it for 3D printer tuning, vibration analysis, motion detection, orientation sensing, and robotics projects where you need reliable acceleration data.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409150619935,"sku":"6E-3GB3-A152","price":9.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_02816adf-a66b-4a2f-9092-7a59f4239d3c.jpg?v=1765772265"},{"product_id":"shillehtek-ads-1115-pre-soldered","title":"ADS1115 Pre-Soldered ADC Analog to Digital Converter Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"60\"\u003eShillehTek ADS1115 ADC Module\u003c\/strong\u003e adds high-quality analog input capability to Arduino, Raspberry Pi, and other microcontroller projects by converting analog voltages into precise digital readings. It is a \u003cstrong data-start=\"233\" data-end=\"271\" data-is-only-node=\"\"\u003e16-bit analog-to-digital converter\u003c\/strong\u003e that communicates over \u003cstrong data-start=\"295\" data-end=\"302\"\u003eI2C\u003c\/strong\u003e, making it easy to wire and great for reading sensors that output analog signals like potentiometers, light sensors, force sensors, gas sensors, and battery or solar voltage monitors. Use it when your board does not have enough analog pins, when you want higher resolution than a typical built-in ADC, or when you need stable measurements for data logging and IoT dashboards.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409179619615,"sku":"KR-EZ4W-0150","price":9.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_625e9b77-37db-4d9d-9824-2199e2793ceb.jpg?v=1765778692"},{"product_id":"shillehtek-bmp180-pre-soldered","title":"BMP180 Pre-Soldered Pressure \u0026 Temperature Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek BMP180 Pressure and Temperature Sensor\u003c\/strong\u003e is a classic, beginner-friendly module for measuring \u003cstrong data-start=\"134\" data-end=\"157\"\u003ebarometric pressure\u003c\/strong\u003e and \u003cstrong data-start=\"162\" data-end=\"177\" data-is-only-node=\"\"\u003etemperature\u003c\/strong\u003e in Arduino and Raspberry Pi projects. It is widely used for \u003cstrong data-start=\"238\" data-end=\"261\"\u003ealtitude estimation\u003c\/strong\u003e by tracking pressure changes, which makes it great for simple weather stations, elevation tracking, drones, and robotics builds. The BMP180 communicates over \u003cstrong data-start=\"420\" data-end=\"427\"\u003eI2C\u003c\/strong\u003e, has tons of example code available, and is a solid choice when you want a proven sensor that is easy to wire and quick to get running.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409217401119,"sku":"XX-18H8-5HO6","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/2-zoomed-rotated.png?v=1714017747"},{"product_id":"shillehtek-bmp280-pre-soldered","title":"BMP280 Pre-Soldered Pressure \u0026 Temperature Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek BMP280 Pressure and Temperature Sensor\u003c\/strong\u003e is a compact, reliable module for measuring \u003cstrong data-start=\"125\" data-end=\"148\"\u003ebarometric pressure\u003c\/strong\u003e and \u003cstrong data-start=\"153\" data-end=\"168\" data-is-only-node=\"\"\u003etemperature\u003c\/strong\u003e in Arduino and Raspberry Pi projects. It is commonly used to estimate \u003cstrong data-start=\"239\" data-end=\"259\"\u003ealtitude changes\u003c\/strong\u003e from pressure readings, making it great for weather builds, indoor environment monitoring, drones, and robotics projects that benefit from elevation or pressure data. With \u003cstrong data-start=\"432\" data-end=\"489\"\u003eI2C (and often SPI support depending on the breakout)\u003c\/strong\u003e plus wide library support, it is an easy drop-in sensor for clean wiring and fast prototyping.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":48409233719583,"sku":"C8-HPX6-BL71","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1..jpg?v=1766204941"},{"product_id":"shillehtek-pre-soldered-authentic-stm32f103c8t6-arm-stm32","title":"STM32F103C8T6 Blue Pill Pre-Soldered ARM Development Board Kit Pro USB V","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"103\"\u003eShillehTek STM32F103C8T6 Blue Pill ARM Development Board Kit (Pro USB V)\u003c\/strong\u003e is a compact, high-performance ARM Cortex-M3 board that is a huge step up from basic 8-bit microcontrollers, while still being affordable and beginner friendly. It is a popular choice for embedded prototyping, robotics control, sensor projects, and learning STM32 development. With plenty of GPIO, timers, and serial interfaces, you can build real-time projects like motor control, data logging, and fast sensor reading with clean timing and solid performance.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"1","offer_id":51517743726879,"sku":"N0-6UOA-71NT-1","price":8.99,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":51517743759647,"sku":"N0-6UOA-71NT-2","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/STM321000_54948ecb-b57e-4138-ba86-774785a72efe.png?v=1768710610"},{"product_id":"shillehtek-gy-302-bh1750-pre-soldered-light-intensity-module","title":"BH1750 Pre-Soldered Digital Light Sensor for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"69\"\u003eShillehTek BH1750 Digital Light Sensor\u003c\/strong\u003e measures ambient light intensity as a digital \u003cstrong data-start=\"116\" data-end=\"123\"\u003elux\u003c\/strong\u003e reading, making it perfect for Arduino and Raspberry Pi projects that need accurate light data without messy analog calibration. It communicates over \u003cstrong data-start=\"274\" data-end=\"281\" data-is-only-node=\"\"\u003eI2C\u003c\/strong\u003e, so wiring is simple and libraries are widely available. Use it for smart lighting, automatic dimming, plant grow monitoring, daylight detection, security lighting triggers, and any build where you want consistent, real-world light measurements.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49942034612511,"sku":"3O-WETZ-7FUE","price":6.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_631c26f3-3e2d-48b5-a28b-8ebdedd3d390.jpg?v=1765774410"},{"product_id":"seeed-studio-xiao-rp2040-pre-soldered-with-usb-to-usb-c-cable","title":"XIAO RP2040 Pre-Soldered Microcontroller for Arduino \u0026 MicroPython","description":"\u003cp\u003eThe Seeed Studio XIAO RP2040 Pre-Soldered Microcontroller Arduino is a compact, ready-to-use board that arrives pre-soldered so you can plug in sensors and start prototyping immediately; its \u003cstrong\u003etiny 20mm x 17.5mm\u003c\/strong\u003e footprint makes it perfect for space-constrained projects while the \u003cstrong\u003e133 MHz ARM Cortex-M0+\u003c\/strong\u003e processor delivers responsive performance for embedded applications. Easy to program with Arduino IDE, C++, Python or MicroPython, it supports UART, SPI, I2C and PWM for flexible interfacing and is engineered for \u003cstrong\u003elow power consumption\u003c\/strong\u003e, making it suitable for battery-powered designs.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49948952428831,"sku":"1F-L04I-9YLO","price":14.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/11_305ea48b-967c-4258-8c15-1bd6dd87eba6.png?v=1773478048"},{"product_id":"shillehtek-mpu9250-authentic-gy-9250-pre-soldered","title":"MPU9250 GY-9250 Pre-Soldered 9-DOF IMU Sensor for Arduino, Raspberry Pi \u0026 ESP32","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"80\"\u003eShillehTek Pre-Soldered MPU9250 GY-9250 9-DOF IMU\u003c\/strong\u003e is a full motion sensing module that combines a \u003cstrong data-start=\"129\" data-end=\"196\" data-is-only-node=\"\"\u003e3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer\u003c\/strong\u003e to track orientation, rotation, movement, and heading in real time. It is a strong choice when you want more than basic tilt and acceleration, since the magnetometer adds compass style heading for more stable orientation tracking. With header pins pre-soldered, it is ready for quick wiring to Arduino, ESP32, Raspberry Pi, and other microcontroller projects for robotics, drones, navigation demos, and sensor fusion learning.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49949035036959,"sku":"BV-4QG9-CQJ8","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_8f9aac9e-6a98-41f3-8d79-c20b51b3e97d.jpg?v=1765782654"},{"product_id":"pre-soldered-gy-906-mlx90614-baa-infrared-temperature-sensor","title":"MLX90614 Pre-Soldered IR Temperature Sensor Module for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"72\"\u003eShillehTek MLX90614 IR Temperature Sensor\u003c\/strong\u003e measures temperature without contact by reading infrared energy, making it perfect for Arduino and Raspberry Pi projects where you cannot or do not want to touch the object. It communicates over \u003cstrong data-start=\"268\" data-end=\"275\" data-is-only-node=\"\"\u003eI2C\u003c\/strong\u003e, so it is easy to wire and widely supported with libraries. Use it for contactless surface temperature checks, human presence and skin-temperature style demos, electronics temperature monitoring, moving object measurements, and automation projects where you want fast temperature readings without a probe.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49952161628447,"sku":"VB-0T9M-PDE0","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_2d2956ca-023e-4c68-9bec-ffc366212e72.jpg?v=1732302100"},{"product_id":"shillehtek-iic-i2c-logic-level-converter-pre-soldered","title":"Pre-Soldered I2C Logic Level Converter 3.3V-5V Bi-Directional for Arduino, Raspberry Pi, ESP32 \u0026 Pico","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"96\"\u003eShillehTek I2C Logic Level Converter (3.3V to 5V, bi-directional)\u003c\/strong\u003e lets 3.3V boards safely communicate with 5V devices on \u003cstrong data-start=\"152\" data-end=\"187\"\u003eIIC\/I2C and other digital lines\u003c\/strong\u003e without flaky signals or risking damage. It is perfect when you are mixing systems like \u003cstrong data-start=\"276\" data-end=\"314\" data-is-only-node=\"\"\u003eRaspberry Pi, ESP32, Pico W (3.3V)\u003c\/strong\u003e with \u003cstrong data-start=\"320\" data-end=\"362\"\u003eArduino UNO, 5V sensors, or 5V modules\u003c\/strong\u003e. This bi-directional converter is commonly used on I2C buses (SDA\/SCL) and can also be used for other digital signals where clean level shifting matters.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"1","offer_id":51517761388831,"sku":"DG-PPV2-DB31","price":6.25,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":50575497363743,"sku":"2H-1IDF-42YG","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_21c04d29-f871-48e9-8029-22977ac5ce46.jpg?v=1765781320"},{"product_id":"shillehtek-original-a4988-stepper-motor-driver-with-heatsink","title":"A4988 Pre-Soldered Stepper Motor Driver with Heatsink for 3D Printers \u0026 Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"82\"\u003eShillehTek A4988 Stepper Motor Driver with Heatsink\u003c\/strong\u003e is a compact driver module used to control bipolar stepper motors with precise step and direction signals, making it a standard choice for \u003cstrong data-start=\"222\" data-end=\"280\"\u003e3D printers, CNC machines, and robotics motion systems\u003c\/strong\u003e. It supports \u003cstrong data-start=\"294\" data-end=\"311\" data-is-only-node=\"\"\u003emicrostepping\u003c\/strong\u003e for smoother motion and finer positioning, and the included heatsink helps with thermal performance during longer runs. Pair it with a controller board (Arduino\/GRBL, RAMPS-style 3D printer boards, or other motion controllers) to drive stepper motors reliably while tuning current limits for your motor and setup.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":49993486729503,"sku":"S9-WSW8-4S14","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_3a523c18-1612-414c-9fed-2f2027a2dc98.png?v=1771269766"},{"product_id":"shillehtek-pre-soldered-txs0108e-high-speed-full-duplex-8-channel-logic-level-bi-directional-converter","title":"TXS0108E Pre-Soldered 8-Channel Logic Level Converter for Arduino, Raspberry Pi, ESP32 \u0026 Pico","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"95\"\u003eShillehTek Pre-Soldered TXS0108E 8-Channel Logic Level Converter\u003c\/strong\u003e is a fast, multi-channel voltage translator that lets \u003cstrong data-start=\"150\" data-end=\"192\"\u003e3.3V and 5V devices communicate safely\u003c\/strong\u003e in the same project. It is perfect when you are mixing boards like \u003cstrong data-start=\"260\" data-end=\"296\" data-is-only-node=\"\"\u003eRaspberry Pi, ESP32, Pico (3.3V)\u003c\/strong\u003e with \u003cstrong data-start=\"302\" data-end=\"328\"\u003eArduino and 5V modules\u003c\/strong\u003e, especially when you need more than just SDA\/SCL. With \u003cstrong data-start=\"384\" data-end=\"398\"\u003e8 channels\u003c\/strong\u003e and \u003cstrong data-start=\"403\" data-end=\"427\"\u003epre-soldered headers\u003c\/strong\u003e, it is ready for clean, quick wiring in breadboard builds and projects with lots of digital signals.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"1","offer_id":51517757423903,"sku":"UR-OLYQ-ZZ3B","price":4.99,"currency_code":"USD","in_stock":true},{"title":"3","offer_id":50575495004447,"sku":"AD-8BVC-BW8P","price":7.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_9d57f4b2-cc50-4540-828d-24f71e8ab894.jpg?v=1765779535"},{"product_id":"xiao-seeed-nrf52840-pre-soldered-with-usb-c-cable","title":"Seeed XIAO nRF52840 Pre-Soldered USB-C Dev Board for Arduino \u0026 MicroPython","description":"\u003cp\u003eExperience rapid prototyping with the \u003cstrong\u003eXIAO Seeed nRF52840\u003c\/strong\u003e pre-soldered USB-C dev board, a compact BLE5-enabled module designed for Arduino and MicroPython workflows; ready to plug in, this tiny development board (21.5mm x 17.5mm) delivers a \u003cstrong\u003e64 MHz 32-bit Cortex-M4\u003c\/strong\u003e core, efficient BLE5 wireless and USB-C connectivity for easy power and data, plus \u003cstrong\u003elow-power\u003c\/strong\u003e operation ideal for battery projects; compatible with C++, Python and the Arduino IDE and offering UART, SPI, I2C and PWM interfacing, it streamlines IoT, wearable and space-constrained embedded applications.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50575486583071,"sku":"CB-VSRU-8TSF","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_a8bb3944-d5f2-4cf9-a736-ed6f357ae0df.png?v=1773477822"},{"product_id":"xiao-seeed-esp32s3-pre-soldered-with-usb-c-cable","title":"XIAO ESP32S3 Pre-Soldered Microcontroller with WiFi \u0026 Bluetooth for Arduino \u0026 MicroPython","description":"\u003cp\u003eThe ShillehTek XIAO ESP32S3 is a compact, ready-to-use microcontroller with onboard WiFi and Bluetooth, built for makers who want fast, practical results. \u003cstrong\u003ePre-soldered\u003c\/strong\u003e and plug-and-play, the module measures just 21.5mm x 17.5mm, making it ideal for space-constrained or embedded projects. It supports Arduino IDE and multiple languages including C++, Python and MicroPython so you can work in the environment you prefer. The board balances capability and efficiency for IoT and DIY uses, with a \u003cstrong\u003e240 MHz 32-bit dual-core LX7 processor\u003c\/strong\u003e for responsive performance and a low-power design suitable for battery-powered applications. Standard interfaces such as UART, SPI, I2C and PWM simplify connecting sensors and peripherals, keeping integration straightforward for prototyping and deployment.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50575486845215,"sku":"MA-D5N9-ESKR","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/5_fe790a95-a7a0-452a-ad0d-8cc0b943cc86.png?v=1773477876"},{"product_id":"xiao-seeed-esp32c6-pre-soldered-with-usb-c-cable","title":"ESP32-C6 Pre-Soldered XIAO Seeed Development Board with USB-C Cable for Arduino \u0026 MicroPython","description":"\u003cp\u003eThe \u003cstrong\u003epre-soldered\u003c\/strong\u003e XIAO Seeed ESP32-C6 development board is ready to plug in and start your projects, and its tiny footprint (21.5 × 17.5 mm) makes it ideal for space-constrained designs. Equipped with a \u003cstrong\u003e160 MHz 32-bit RISC-V\u003c\/strong\u003e single-core processor, it delivers capable processing for a wide range of DIY and IoT applications while maintaining low power consumption suited to battery-powered use. The board supports common communication protocols such as UART, SPI, I2C and PWM, and is easy to program from the Arduino IDE or with C++, Python and MicroPython, enabling fast prototyping and straightforward integration into portable sensors, wearables, and other compact projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50575488057631,"sku":"CU-WHWT-2046","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/7_e4c3f0d0-4eb1-4aca-99e9-ce9807bee5fc.png?v=1773477926"},{"product_id":"xiao-seeed-esp32c3-pre-soldered-with-usb-to-usb-c-cable","title":"XIAO ESP32C3 Pre-Soldered WiFi + BLE Microcontroller for Arduino \u0026 MicroPython","description":"\u003cp\u003e\u003cstrong\u003ePre-soldered\u003c\/strong\u003e XIAO ESP32C3 Microcontroller with WiFi and BLE offers a compact, ready-to-use platform for embedded and IoT projects. Pre-soldered for immediate prototyping and a \u003cstrong\u003esmall form factor (20mm x 17.5mm)\u003c\/strong\u003e, it combines a 160 MHz 32-bit RISC-V single-core processor with flexible connectivity and low power operation. Easy to program via C++, Python, MicroPython or the \u003cstrong\u003eArduino IDE\u003c\/strong\u003e, it exposes UART, SPI, I2C and PWM for sensor and actuator interfacing, ideal for battery-powered applications thanks to \u003cstrong\u003elow power\u003c\/strong\u003e behavior and well suited for wearables, compact sensors and automation projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50575490056479,"sku":"ZF-SB9A-LHXX","price":13.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/9_8d832fb2-d16f-464b-84ea-487f0f6145e0.png?v=1773478016"},{"product_id":"shillehtek-pre-soldered-authentic-stm32f411ceu6","title":"STM32F411CEU6 Pre-Soldered Black Pill ARM Development Board for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"79\"\u003eShillehTek Pre-Soldered STM32F411CEU6 Black Pill\u003c\/strong\u003e is a powerful ARM Cortex-M4 development board that gives you significantly more speed and peripherals than typical 8-bit Arduino boards, while staying compact and breadboard friendly. With the header pins already soldered, you can plug it in and start building immediately using popular toolchains like \u003cstrong data-start=\"383\" data-end=\"398\"\u003eArduino IDE\u003c\/strong\u003e, \u003cstrong data-start=\"400\" data-end=\"416\" data-is-only-node=\"\"\u003eSTM32CubeIDE\u003c\/strong\u003e, or \u003cstrong data-start=\"421\" data-end=\"435\"\u003ePlatformIO\u003c\/strong\u003e. It is a great fit for robotics control, real-time sensor projects, motor control, HID and USB experiments, and any build where you want fast performance and reliable timing without fighting the setup.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50620930818335,"sku":"LY-PQMA-ZWYU","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_32bce60a-b106-49ea-8962-91f86bca5fb0.png?v=1770872899"},{"product_id":"shillehtek-1-8-inch-tft-lcd-display-module-dual-side-soldering","title":"1.8\" TFT LCD Display 128x160 Pre-Soldered Both Sides for Arduino \u0026 ESP32","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"72\"\u003eShillehTek 1.8\" TFT LCD Display (128x160)\u003c\/strong\u003e is a compact, colorful screen that is perfect for Arduino and ESP32 projects where you want a real visual interface instead of just LEDs. With the headers \u003cstrong data-start=\"228\" data-end=\"258\"\u003epre-soldered on both sides\u003c\/strong\u003e, it is ready to drop into breadboards, jumper wires, or stacked setups without extra soldering. These displays are commonly driven over \u003cstrong data-start=\"395\" data-end=\"402\" data-is-only-node=\"\"\u003eSPI\u003c\/strong\u003e, making them fast enough for menus, sensor dashboards, animations, simple games, logos, and status screens for IoT and robotics projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":50620939010335,"sku":"6A-2IUA-HJQB","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/6_459a881c-6c13-4cc6-a570-ab3a24f79f1b.png?v=1771126393"},{"product_id":"shillehtek-pre-soldered-stm32h723zgt6-core-development-board","title":"STM32H723ZGT6 Pre-Soldered Core Development Board","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"27\" data-end=\"91\"\u003eShillehTek Pre-Soldered STM32H723ZGT6 Core Development Board\u003c\/strong\u003e is a high-performance STM32H7 series ARM board built for demanding embedded projects that need serious speed, fast peripherals, and plenty of I\/O. With the header pins already soldered, it is ready to drop onto a breadboard or jumper-wired prototype without extra setup. This board is a strong choice for advanced robotics, high-rate sensor data acquisition, real-time control, signal processing, and embedded applications where you want more headroom than entry-level microcontrollers.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51470230257951,"sku":"X6-96V5-4GHE","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/566f01263929324d6c97f6965417826b.jpg?v=1765664417"},{"product_id":"4-channel-relay-module-programmable-delay-6-24v","title":"4-Channel Programmable Relay Module 6-24V DC Trigger Delay Timer \u0026 Motor Reversing Controller","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"82\" data-end=\"126\"\u003eShillehTek 4CH Programmable Relay Module\u003c\/strong\u003e is a compact 4-channel relay board built for automation, remote switching, and multi-load control projects. Powered from a wide \u003cstrong data-start=\"255\" data-end=\"270\"\u003eDC 6 to 24V\u003c\/strong\u003e input, it’s easy to drop into control boxes, benchtop prototypes, and DIY builds where you need reliable switching for lights, pumps, fans, solenoids, and other loads (within relay ratings). With four independent channels and isolation between control and load side, it’s a practical choice for home automation, robotics, test rigs, and maker projects that need clean wiring and repeatable results.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789636337951,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/BA311_7.jpg?v=1773966613"},{"product_id":"ac-220v-1-channel-time-delay-relay-module","title":"AC 220V 1-Channel Time Delay Relay Module","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"175\" data-end=\"231\"\u003eShillehTek AC 220V 1-Channel Time Delay Relay Module\u003c\/strong\u003e is a compact timer relay designed for delayed on\/off switching in DIY automation and light-duty control projects. Use it to add \u003cstrong data-start=\"360\" data-end=\"385\"\u003etime-delay sequencing\u003c\/strong\u003e to loads like lighting, fans, pumps, heaters, or motors, making it useful for retrofits, repairs, control panels, and prototype builds. The board is built for straightforward integration into enclosures and wiring setups, giving you dependable timed control when you need a simple one-channel AC relay timer.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789639549215,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_1_684c87c9-059c-4fc7-9f84-904fe01a0b83.jpg?v=1773965007"},{"product_id":"esp32-devkitc-ve-8mb-flash-8mb-psram-presoldered","title":"ESP32-DevKitC-VE Pre-Soldered Dev Board with 8MB Flash + 8MB PSRAM","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"120\" data-end=\"202\"\u003eShillehTek ESP32-DevKitC-VE Dev Board (Presoldered) with 8MB Flash + 8MB PSRAM\u003c\/strong\u003e is a high-memory ESP32 development board built for larger WiFi + Bluetooth projects that need extra headroom. With \u003cstrong data-start=\"318\" data-end=\"342\"\u003epreinstalled headers\u003c\/strong\u003e, it’s ready for quick breadboard wiring and rapid prototyping, while the added \u003cstrong data-start=\"422\" data-end=\"431\"\u003ePSRAM\u003c\/strong\u003e helps with memory-heavy applications like web dashboards, image buffers, larger libraries, data logging, and complex IoT firmware. The DevKitC-VE footprint keeps it compatible with common ESP32 accessories and makes it easy to connect sensors, displays, relays, and other peripherals using Arduino, ESP-IDF, or PlatformIO workflows.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789639713055,"sku":null,"price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AH111_2.jpg?v=1773964928"},{"product_id":"rp2040-zero-microcontroller-board-presoldered-headers","title":"RP2040 Zero Microcontroller Board with Pre-Soldered Headers","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"85\" data-end=\"147\"\u003eShillehTek RP2040 Zero Microcontroller Board (Presoldered)\u003c\/strong\u003e is a tiny, budget-friendly development board built for fast prototyping and compact embedded projects. Powered by the \u003cstrong data-start=\"266\" data-end=\"276\"\u003eRP2040\u003c\/strong\u003e (the Raspberry Pi–designed microcontroller), it’s a solid choice for MicroPython, CircuitPython, and C\/C++ projects like sensor interfaces, robotics control, small automation builds, and portable prototypes. With \u003cstrong data-start=\"490\" data-end=\"514\"\u003epreinstalled headers\u003c\/strong\u003e and a small footprint, it’s easy to wire up on a bench, fit into tight enclosures, and iterate quickly in classrooms, maker labs, and real-world builds.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789642924319,"sku":null,"price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/4_160022af-8b1b-4fcc-aa1a-c3de5c7db123.jpg?v=1773966508"},{"product_id":"esp32-wroom-dev-board-cp2102-usb-c-presoldered","title":"ESP-WROOM-32 (ESP-32S) ESP32 Dev Board CP2102 USB-C Pre-Soldered","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"104\" data-end=\"178\"\u003eShillehTek ESP-WROOM-32 (ESP-32S) Dev Board CP2102 USB-C (Presoldered)\u003c\/strong\u003e is a reliable ESP32 development board for WiFi + Bluetooth projects, built for fast setup and smooth programming. It pairs the popular \u003cstrong data-start=\"314\" data-end=\"330\"\u003eESP-WROOM-32\u003c\/strong\u003e module with a \u003cstrong data-start=\"345\" data-end=\"367\"\u003eCP2102 USB-to-UART\u003c\/strong\u003e interface and a modern \u003cstrong data-start=\"391\" data-end=\"400\"\u003eUSB-C\u003c\/strong\u003e port for easy flashing, serial monitoring, and power. With \u003cstrong data-start=\"460\" data-end=\"484\"\u003epreinstalled headers\u003c\/strong\u003e, it’s ready for breadboards and quick wiring, making it ideal for smart home builds, MQTT devices, wireless sensors, automation prototypes, and classroom labs across Windows, macOS, and Linux.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789643022623,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/5_336ca091-523b-4bbf-adb1-a873138d66e1.jpg?v=1773966380"},{"product_id":"esp32-dev-board-cp2102-type-c-4mb","title":"ESP32 Dev Board 4MB CP2102 USB-C Pre-Soldered 38-Pin","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"137\" data-end=\"205\"\u003eShillehTek ESP32 Dev Board 4MB CP2102 USB-C (38 Pin) Presoldered\u003c\/strong\u003e is a WiFi + Bluetooth development board made for fast prototyping, testing, and connected device builds. It features an \u003cstrong data-start=\"326\" data-end=\"350\"\u003eESP32 with 4MB flash\u003c\/strong\u003e and a reliable \u003cstrong data-start=\"366\" data-end=\"388\"\u003eCP2102 USB-to-UART\u003c\/strong\u003e interface with a modern \u003cstrong data-start=\"413\" data-end=\"422\"\u003eUSB-C\u003c\/strong\u003e port for easy programming, serial monitoring, and power. With \u003cstrong data-start=\"485\" data-end=\"509\"\u003epreinstalled headers\u003c\/strong\u003e, it’s ready for breadboards, jumper wiring, and quick peripheral hookups, making it a solid choice for makers, students, and embedded developers building smart home projects, MQTT devices, sensor nodes, robotics, and automation prototypes.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789646233887,"sku":null,"price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AH365_7.jpg?v=1773966237"},{"product_id":"esp8266-d1-mini-v3-4mb-dev-board-presoldered","title":"ESP8266 D1 Mini V3 4MB Pre-Soldered Dev Board for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"91\" data-end=\"152\"\u003eShillehTek ESP8266 D1 Mini V3 4MB Dev Board (Presoldered)\u003c\/strong\u003e is a compact WiFi microcontroller board built for fast IoT prototyping and smart home projects. With \u003cstrong data-start=\"254\" data-end=\"278\"\u003epreinstalled headers\u003c\/strong\u003e, it’s ready to plug into breadboards and header sockets for quick wiring, testing, and iteration. Powered by the popular \u003cstrong data-start=\"400\" data-end=\"411\"\u003eESP8266\u003c\/strong\u003e platform and equipped with \u003cstrong data-start=\"439\" data-end=\"452\"\u003e4MB flash\u003c\/strong\u003e, it’s a solid choice for MQTT sensor nodes, simple web servers, automation triggers, and wireless telemetry. The D1 Mini V3 form factor keeps it compatible with many \u003cstrong data-start=\"619\" data-end=\"638\"\u003eD1 Mini shields\u003c\/strong\u003e and common Arduino-style workflows, making it easy to build and deploy small connected devices.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789649510687,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/5_b4d2eb18-13ea-49fe-9931-05bfb4f16696.jpg?v=1773966204"},{"product_id":"seeeduino-xiao-samd21-arduino-board-presoldered","title":"Seeeduino XIAO SAMD21 Arduino Board Pre-Soldered","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-end=\"168\" data-start=\"104\"\u003eShillehTek Seeeduino XIAO SAMD21 Arduino Board (Presoldered)\u003c\/strong\u003e is an ultra-compact, Arduino-compatible microcontroller board built for space-constrained projects like wearables, sensor nodes, and embedded prototypes. With \u003cstrong data-end=\"352\" data-start=\"328\"\u003epreinstalled headers\u003c\/strong\u003e, it’s ready to plug into breadboards and header sockets for quick wiring and faster iteration. Based on the \u003cstrong data-end=\"471\" data-start=\"461\"\u003eSAMD21\u003c\/strong\u003e platform, it works smoothly with the Arduino ecosystem for rapid coding, testing, and debugging, making it a strong choice for classrooms, maker labs, and compact builds where a tiny footprint matters.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789649543455,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AH133_7.jpg?v=1773966180"},{"product_id":"esp32-c3-dev-board-4mb-wifi-presoldered","title":"ESP32-C3 4MB Pre-Soldered WiFi Dev Board for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"101\" data-end=\"157\"\u003eShillehTek ESP32-C3 4MB Dev Board (Presoldered) WiFi\u003c\/strong\u003e is a compact ESP32 development board made for fast, reliable wireless prototyping. With \u003cstrong data-start=\"246\" data-end=\"270\"\u003epreinstalled headers\u003c\/strong\u003e, it’s breadboard-ready for quick wiring and testing, while onboard \u003cstrong data-start=\"338\" data-end=\"346\"\u003eWiFi\u003c\/strong\u003e makes it ideal for IoT projects like sensor nodes, home automation, MQTT devices, and simple web servers. The \u003cstrong data-start=\"457\" data-end=\"470\"\u003e4MB flash\u003c\/strong\u003e provides room for firmware and storage, and the breakout-friendly layout makes it easy to connect peripherals and iterate quickly using common ESP32 toolchains such as \u003cstrong data-start=\"639\" data-end=\"650\"\u003eArduino\u003c\/strong\u003e and \u003cstrong data-start=\"655\" data-end=\"666\"\u003eESP-IDF\u003c\/strong\u003e.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789652721951,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/2_e88b8743-c38b-43ea-9d5e-637b7f4af405.jpg?v=1773966150"},{"product_id":"esp32-s3-nano-dev-board-presoldered-wifi-ble","title":"ESP32-S3 Nano Dev Board Pre-Soldered WiFi + BLE for Arduino","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"192\" data-end=\"255\"\u003eShillehTek ESP32-S3-Nano Dev Board (Presoldered) WiFi + BLE\u003c\/strong\u003e is a compact ESP32-S3 development board built for fast wireless prototyping. With \u003cstrong data-start=\"338\" data-end=\"362\"\u003epreinstalled headers\u003c\/strong\u003e, it’s easy to drop into a breadboard or header sockets for quick wiring, testing, and iteration. The onboard \u003cstrong data-start=\"472\" data-end=\"511\"\u003eWiFi and Bluetooth Low Energy (BLE)\u003c\/strong\u003e make it a strong choice for IoT sensor nodes, smart home projects, remote controls, telemetry, and connected prototypes. Compatible with popular ESP32 workflows like \u003cstrong data-start=\"678\" data-end=\"689\"\u003eArduino\u003c\/strong\u003e and \u003cstrong data-start=\"694\" data-end=\"705\"\u003eESP-IDF\u003c\/strong\u003e, this nano-size board is ideal for makers, students, and embedded developers who want a small footprint without slowing down firmware development and debugging.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789652787487,"sku":null,"price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_7.jpg?v=1773966130"},{"product_id":"esp32-s3-devkitc-1-presoldered-headers","title":"ESP32-S3 DevKitC-1 Dev Board with Pre-Soldered Headers","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"186\" data-end=\"243\"\u003eShillehTek ESP32-S3 DevKitC-1 Dev Board (Presoldered)\u003c\/strong\u003e is a ready-to-build ESP32 development board for WiFi and IoT projects, designed for fast wiring, testing, and firmware iteration. With \u003cstrong data-start=\"379\" data-end=\"403\"\u003epreinstalled headers\u003c\/strong\u003e, it’s breadboard-ready and ideal for quick prototyping with sensors, displays, relays, and other peripherals. Powered by the \u003cstrong data-start=\"529\" data-end=\"541\"\u003eESP32-S3\u003c\/strong\u003e, this board is a strong fit for embedded applications that need more performance, including real-time control, data processing, and connected device prototypes. Great for makers, students, and engineers building smart home projects, robotics, automation, and compact proof-of-concepts.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789655965983,"sku":null,"price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AK027_1.jpg?v=1773964968"},{"product_id":"esp32-c6-n4-dev-board-presoldered","title":"ESP32-C6-N4 Pre-Soldered Development Board","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe \u003cstrong data-start=\"102\" data-end=\"160\"\u003eShillehTek ESP32-C6-N4 Development Board (Presoldered)\u003c\/strong\u003e is a compact WiFi and IoT development platform built for fast prototyping, testing, and firmware iteration. With \u003cstrong data-start=\"274\" data-end=\"298\"\u003epreinstalled headers\u003c\/strong\u003e, it’s ready for breadboards and quick wiring right out of the box, making it ideal for makers, students, and embedded developers building wireless sensor projects, automation, and connected devices. The breakout-friendly layout provides easy access to GPIO and common interfaces so you can connect peripherals, flash firmware, and iterate quickly using popular Espressif development workflows.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789656031519,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/AK030_1.jpg?v=1773964975"},{"product_id":"raspberry-pi-pico-2w-presoldered-headers","title":"Raspberry Pi Pico 2W with Pre-Soldered Headers","description":"\u003cp\u003eBuild faster with the \u003cstrong\u003eShillehTek Raspberry Pi Pico 2W Presoldered Headers\u003c\/strong\u003e, made for clean, reliable, plug-and-play prototyping. These \u003cstrong\u003epre-soldered (preinstalled) male headers\u003c\/strong\u003e are professionally soldered onto your \u003cstrong\u003eRaspberry Pi Pico 2W\u003c\/strong\u003e so you can skip the soldering step and start wiring immediately. Get a secure fit in \u003cstrong\u003esolderless breadboards\u003c\/strong\u003e, prototype boards, and header sockets, with improved mechanical stability for \u003cstrong\u003eenclosures\u003c\/strong\u003e and repeat builds. Perfect for \u003cstrong\u003eMicroPython\u003c\/strong\u003e and \u003cstrong\u003eArduino\u003c\/strong\u003e workflows, this Pico 2W with soldered headers is ideal for \u003cstrong\u003eIoT\u003c\/strong\u003e, sensors, robotics, and automation projects where consistent power and signal connections matter.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789659210015,"sku":null,"price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/RA860-1.jpg?v=1773965038"},{"product_id":"raspberry-pi-pico-2-usb-c-presoldered-headers","title":"Raspberry Pi Pico 2 with Pre-Soldered Headers","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSpeed up prototyping with the \u003cstrong data-start=\"30\" data-end=\"90\"\u003eShillehTek Raspberry Pi Pico 2 with Preinstalled Headers\u003c\/strong\u003e, a plug-and-play board that saves setup time by arriving ready for breadboards and header sockets right out of the box. Built for hobbyists, educators, and developers, it’s ideal for fast iteration on embedded projects, sensors, robotics, and automation, with a clean, stable fit for repeat builds in enclosures, kits, and lab setups so you can focus on coding, testing, and shipping projects faster.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789662421279,"sku":null,"price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/01.png?v=1773965033"},{"product_id":"arduino-nano-v3-presoldered-ch340g-atmega328p","title":"Arduino Nano V3.0 Pre-Soldered CH340G ATmega328P","description":"\u003cp\u003eThe \u003cstrong\u003eShillehTek Arduino Nano V3.0\u003c\/strong\u003e Presoldered CH340G ATmega328P is a compact development board designed for hobbyists and prototypers who need a breadboard-friendly, ready-to-use controller; its presoldered headers enable tidy, rapid assembly while the onboard \u003cstrong\u003eCH340G USB-to-serial interface\u003c\/strong\u003e provides straightforward PC connectivity for programming and serial monitoring. Built around the classic \u003cstrong\u003eATmega328P\u003c\/strong\u003e, it supports the Arduino IDE and community libraries, making it ideal for sensors, wearable prototypes and small robotics projects with reliable USB driver support for fast iteration.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789662486815,"sku":null,"price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/XS997_1.jpg?v=1773965045"},{"product_id":"pro-micro-atmega32u4-5v-16mhz-presoldered-micro-usb","title":"Pro Micro ATmega32U4 5V 16MHz Pre-Soldered Micro-USB Development Board","description":"\u003cp\u003eDesigned for compact USB-enabled projects, the ShillehTek Pro Micro ATmega32U4 5V 16MHz Presoldered Micro-USB is a ready-to-install development board that brings native USB support to hobbyist and professional builds. With the \u003cstrong\u003eATmega32U4 microcontroller\u003c\/strong\u003e running at \u003cstrong\u003e5V 16MHz\u003c\/strong\u003e, a modern \u003cstrong\u003eMicro-USB connector\u003c\/strong\u003e and presoldered headers, this module minimizes assembly time while delivering reliable USB serial, HID and custom device functionality for keyboards, game controllers, macro pads and embedded prototyping. It works with common AVR toolchains for easy firmware updates and suits rapid prototyping.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":51789669007647,"sku":null,"price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/YY643_11.jpg?v=1773965955"},{"product_id":"gt-u7-gps-module-presoldered-1","title":"GT-U7 NEO-6M GPS Module Pre-Soldered for Arduino \u0026 Raspberry Pi","description":"\u003cp\u003e\u003cstrong\u003eGT-U7 NEO-6M GPS module\u003c\/strong\u003e is a compact \u003cstrong\u003eUART serial GPS receiver\u003c\/strong\u003e for adding real-time location data to Arduino, Raspberry Pi, and other microcontroller projects. Built around the \u003cstrong\u003eNEO-6M\u003c\/strong\u003e, it outputs standard GPS data over serial for mapping, navigation, robotics, vehicle tracking, and portable data-logging applications. The board is easy to integrate for prototyping thanks to its pre-soldered headers, and it works well with Arduino sketches, Raspberry Pi Python projects, and controllers such as ESP32 that can read GPS coordinates from a serial interface. Use this \u003cstrong\u003eGPS module\u003c\/strong\u003e when you need dependable positioning in DIY electronics, home automation, or field projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":52246904013087,"sku":"YZ262","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/2_438ddf0d-4bef-44ba-a606-96b99d2c99fe.jpg?v=1773965943"},{"product_id":"gy-vl53l0xv2-laser-ranging-tof-sensor-module","title":"VL53L0X Pre-Soldered Laser Ranging ToF Sensor Module","description":"\u003cp\u003e\u003cstrong\u003eLaser ranging ToF sensor module\u003c\/strong\u003e, the \u003cstrong\u003eVL53L0X\u003c\/strong\u003e measures distance using time-of-flight technology for fast, accurate non-contact ranging up to 2 meters. This compact \u003cstrong\u003eproximity sensing module\u003c\/strong\u003e communicates over \u003cstrong\u003eI2C and PWM\u003c\/strong\u003e, making it easy to add obstacle detection, height sensing, gesture or presence awareness, and distance-based control to robotics, drones, wearables, home automation, smart devices, and prototyping projects. Supplied pre-soldered for quicker integration, it is a practical choice for Arduino, Raspberry Pi, ESP32, and other microcontroller platforms that need reliable short-range distance measurement.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":52246904045855,"sku":"YZ154","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/6_76b6681c-d462-424f-9946-276a4be0d1ee.jpg?v=1773965933"},{"product_id":"st-link-v2-stm8-stm32-programmer-downloader","title":"ST-LINK V2 Programmer\/Debugger for STM8 \u0026 STM32","description":"\u003cp\u003eThe \u003cstrong\u003eST-LINK V2 programmer\/debugger\u003c\/strong\u003e is a compact USB tool for flashing firmware and debugging \u003cstrong\u003eSTM8 and STM32 microcontrollers\u003c\/strong\u003e, making it ideal for embedded development, prototyping, board bring-up, and microcontroller repair. Compatible with \u003cstrong\u003eSTM32CubeIDE\u003c\/strong\u003e and other ST development tools, it supports code upload, \u003cstrong\u003ein-circuit debugging\u003c\/strong\u003e, stepping through programs, and isolating software or hardware issues during testing. A useful choice for STM32 development boards, custom MCU designs, and engineers, students, or makers building embedded systems, robotics controllers, or automation projects that rely on ST chips; color may vary.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":52246904209695,"sku":"NA376","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/1_1_3067ae91-a868-4f12-9477-8459e3f119c6.png?v=1773965016"},{"product_id":"hx711-weighing-pressure-sensor-module-large-presoldered","title":"HX711 Pre-Soldered Large Load Cell Amplifier Module for Arduino","description":"\u003cp\u003eA large-format load cell amplifier module using the HX711 24-bit ADC. Presoldered for quick integration. Ideal for scales, force measurement, and weight sensing projects with Arduino and microcontrollers.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":52246904406303,"sku":"AB167","price":6.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/db0436dec5bb479058ca6b15654c3745.jpg?v=1773988529"},{"product_id":"max30102-heart-rate-pulse-oximeter-sensor-module-black-presoldered","title":"MAX30102 Pre-Soldered Heart Rate \u0026 Pulse Oximeter Sensor Module","description":"\u003cp\u003e\u003cstrong\u003eHeart rate and pulse oximeter sensor module\u003c\/strong\u003e based on the \u003cstrong\u003eMAX30102\u003c\/strong\u003e, this compact \u003cstrong\u003eI2C biometric sensor\u003c\/strong\u003e measures pulse rate and SpO2 blood oxygen levels for wearable health monitors, fitness trackers, and biomedical prototyping. The combined sensing design helps you add vital-sign monitoring to Arduino, Raspberry Pi, ESP32, and other microcontroller projects without needing separate boards for heart rate and oxygen sensing. Its I2C interface keeps integration straightforward for embedded systems, data logging, and real-time health measurement demos, while the small module format fits portable electronics and custom enclosures. With pre-soldered pins for easier hookup, it is a practical choice for rapid development of wellness devices, research builds, and IoT health projects.\u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":52246904439071,"sku":"NB212","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/NB212_7.jpg?v=1773965205"},{"product_id":"raspberry-pi-pico-2-w-mpu6050-imu-breadboard-starter-kit","title":"Raspberry Pi Pico 2 W + MPU6050 6-Axis IMU Breadboard Starter Kit","description":"\u003cp\u003e\u003cstrong\u003eWhat you get:\u003c\/strong\u003e Raspberry Pi Pico 2 W, MPU6050 (2pcs) module, breadboard, and jumper wire set as bundled in this listing. You will still need a \u003cstrong\u003ecompatible USB cable\u003c\/strong\u003e and your usual Pico setup (firmware tools or MicroPython) to program the board; follow standard \u003cstrong\u003e3.3 V I2C wiring\u003c\/strong\u003e (power, ground, SDA, SCL) for the MPU6050. \u003c\/p\u003e","brand":"ShillehTek","offers":[{"title":"Default Title","offer_id":52277846704415,"sku":null,"price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/files\/RaspberryPiPico2WMPU6050Kit.png?v=1774709727"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0837\/4340\/8415\/collections\/10_d83f8a81-0e7b-46b6-baa1-4bb95da1e756.png?v=1771580685","url":"https:\/\/shillehtek.com\/collections\/pre-soldered.oembed","provider":"ShillehTek","version":"1.0","type":"link"}